Allow to pass extra arguments to mktplinkfw step. Some board requires an extra argument to create a valid image.
Signed-off-by: Alexander Couzens <[email protected]> --- target/linux/ar71xx/image/Makefile | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index c908917..2dd7798 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -38,13 +38,16 @@ define Build/netgear-uImage endef # combine kernel and rootfs into one image +# mktplinkfw <type> <optional extra arguments to mktplinkfw binary> +# <type> is "sysupgrade" or "factory" +# # -a align the rootfs start on an <align> bytes boundary # -j add jffs2 end-of-filesystem markers # -s strip padding from end of the image # -X reserve <size> bytes in the firmware image (hexval prefixed with 0x) define Build/mktplinkfw -$(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $2 \ -k $(word 1,$^) \ -r $@ \ -o [email protected] \ @@ -64,10 +67,12 @@ define Build/mktplinkfw-chn-v2 $(if $(findstring sysupgrade,$1),-s) && mv [email protected] $@ || rm -f $@ endef +# mktplinkfw-initramfs <optional extra arguments to mktplinkfw binary> +# # -c combined image define Build/mktplinkfw-initramfs $(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $2 \ -k $@ \ -o [email protected] \ -s -S \ -- 2.6.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
