Re: [OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support

[Andrew Gaylo]

The DTS and the MK files were in an earlier patch.  My first submission 
to OpenWRT, still getting the hang of the process.

https://lists.openwrt.org/pipermail/openwrt-devel/2015-October/036563.html
Drew

On 2015-10-15 09:53, John Crispin wrote:
On 15/10/2015 17:49, Andrew Gaylo wrote:
from: Andrew Gaylo <ad...@clisystems.com>

This submission is for support of the NixCore X1 board at
http://nixcores.com.  This board uses the RT5350 Ralink processor
already supported by a number of boards in the OpenWRT repository.

Signed-off-by: Andrew Gaylo <ad...@clisystems.com>



i think the dts file is missing



---
diff -uprN

openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network
openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network
---

openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network
2015-10-13 11:10:15.784957130 -0600
+++
openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network
2015-10-15 08:35:48.341341581 -0600
@@ -217,7 +217,7 @@ ramips_setup_interfaces()
         ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
         ucidef_add_switch_vlan "switch0" "2" "0t 5"
         ;;
-
+    nixcorex1 |\
     vocore)
         ucidef_set_interface_lan "eth0.1"
         ucidef_add_switch "switch0" "1" "1"
diff -uprN 
openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh
openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh
--- openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh
2015-10-13 11:10:15.784957130 -0600
+++ openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh
2015-10-15 08:36:21.021340613 -0600
@@ -232,6 +232,9 @@ ramips_board_detect() {
     *"Nexx WT3020")
         name="wt3020"
         ;;
+    *"NixcoreX1")
+        name="nixcorex1"
+        ;;
     *"NW718")
         name="nw718"
         ;;
diff -uprN

openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh

openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh
---

openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh 
  2015-10-13
11:10:15.784957130 -0600
+++

openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh
2015-10-15 08:37:00.029339459 -0600
@@ -72,6 +72,7 @@ platform_check_image() {
     mr-102n | \
     mzk-w300nh2 | \
     nbg-419n | \
+    nixcorex1 | \
     nw718 | \
     omni-emb | \
     omni-emb-hpm | \
diff -uprN openwrt_vanilla/target/linux/ramips/image/Makefile
openwrt_submit/target/linux/ramips/image/Makefile
--- openwrt_vanilla/target/linux/ramips/image/Makefile    2015-10-13
11:10:15.788957130 -0600
+++ openwrt_submit/target/linux/ramips/image/Makefile    2015-10-15
08:37:25.885338693 -0600
@@ -569,6 +569,8 @@ Image/Build/Profile/MZKW300NH2=$(call Bu

 Image/Build/Profile/NCS601W=$(call
BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)

+Image/Build/Profile/NIXCORE-X1=$(call
BuildFirmware/Default8M/$(1),$(1),nixcorex1,NIXCORE-X1)
+
 nw718_mtd_size=3801088
 Image/Build/Profile/NW718=$(call

BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)


@@ -741,6 +743,7 @@ define Image/Build/Profile/Default
     $(call Image/Build/Profile/MZKW300NH2,$(1))
     $(call Image/Build/Profile/NBG-419N,$(1))
     $(call Image/Build/Profile/NCS601W,$(1))
+    $(call Image/Build/Profile/NIXCORE-X1,$(1))
     $(call Image/Build/Profile/NW718,$(1))
     $(call Image/Build/Profile/OMNI-EMB,$(1))
     $(call Image/Build/Profile/OMNI-PLUG,$(1))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel