from: Andrew Gaylo <ad...@clisystems.com>
Submission for support of the NixCore X1 board (http://nixcores.com.)
This board uses the RT5350 Ralink processor already supported by a
number of board in the OpenWRT repository. This is a unified patch from
two earlier patches
Signed-off-by: Andrew Gaylo <ad...@clisystems.com>
---
diff -uprN openwrt_vanilla/target/linux/ramips/dts/NIXCORE-X1.dts
openwrt_submit/target/linux/ramips/dts/NIXCORE-X1.dts
--- openwrt_vanilla/target/linux/ramips/dts/NIXCORE-X1.dts 1969-12-31
17:00:00.000000000 -0700
+++ openwrt_submit/target/linux/ramips/dts/NIXCORE-X1.dts 2015-10-13
11:04:19.636954204 -0600
@@ -0,0 +1,186 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "NixcoreX1", "ralink,rt5350-soc";
+ model = "NixcoreX1";
+
+ palmbus@10000000 {
+ /* Re-enable the gpio1 ports */
+ gpio1: gpio@660 {
+ status = "okay";
+ };
+
+ i2c@900 {
+ status = "okay";
+ };
+ uart@500 {
+ status = "okay";
+ /* Mix of uart and gpio */
+ reset-names = "gpio uartf";
+ };
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl064k";
+ reg = <0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+
+ spidev@1 {
+ compatible = "linux,spidev";
+ spi-max-frequency = <10000000>;
+ reg = <1>;
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ /* Associate the tjag, uartf and led groups with gpio
*/
+ ralink,group = "jtag", "led", "spi_cs1";
+ /* How do we set individual pins? */
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw@10110000 {
+ ralink,portmap = <0x17>;
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,57600";
+ };
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ gpio0 {
+ gpio-export,name = "gpio0";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 0 0>;
+ };
+
+ /* GPIOs 1-6 are I2C,SPI */
+
+ /* GPIO 7-14 are uart1 */
+
+ /* GPIOs 15 & 16 are uart2 */
+
+ /* JTAG */
+ gpio17 {
+ /* JTAG_TDO */
+ gpio-export,name = "gpio17";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 17 0>;
+ };
+ gpio18 {
+ /* JTAG_TDI */
+ gpio-export,name = "gpio18";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 18 0>;
+ };
+ gpio19 {
+ /* JTAG_TMS */
+ gpio-export,name = "gpio19";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 19 0>;
+ };
+ gpio20 {
+ /* JTAG_TCLK */
+ gpio-export,name = "gpio20";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 20 0>;
+ };
+ gpio21 {
+ /* JTAG_TRST_N */
+ gpio-export,name = "gpio21";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio0 21 0>;
+ };
+
+ /* ETH LEDs */
+ /*
+ gpio22 {
+ gpio-export,name = "gpio22";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 0 0>;
+ };
+ gpio23 {
+ gpio-export,name = "gpio23";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 1 0>;
+ };
+ gpio24 {
+ gpio-export,name = "gpio24";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 2 0>;
+ };
+ gpio25 {
+ gpio-export,name = "gpio25";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 3 0>;
+ };
+ */
+ gpio26 {
+ /* ETH4_LED */
+ gpio-export,name = "gpio26";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 4 0>;
+ };
+
+ gpio27 {
+ /* spi_cs1 */
+ gpio-export,name = "gpio27";
+ gpio-export,direction_may_change = <1>;
+ gpios = <&gpio1 5 0>;
+ };
+ };
+
+};
diff -uprN
openwrt_vanilla/target/linux/ramips/rt305x/profiles/nixcore.mk
openwrt_submit/target/linux/ramips/rt305x/profiles/nixcore.mk
---
openwrt_vanilla/target/linux/ramips/rt305x/profiles/nixcore.mk 1969-12-31
17:00:00.000000000 -0700
+++
openwrt_submit/target/linux/ramips/rt305x/profiles/nixcore.mk 2015-10-13
11:04:38.500954359 -0600
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License
v2.
+# See /LICENSE for more information.
+#
+
+define Profile/NIXCORE-X1
+ NAME:=NixcoreX1
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-ohci kmod-usb2 \
+ kmod-i2c-core kmod-i2c-ralink \
+ kmod-spi-dev
+endef
+
+define Profile/NIXCORE-X1/Description
+ Package set for Nixcore X1 board
+endef
+
+$(eval $(call Profile,NIXCORE-X1))
diff -uprN
openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network
openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network
---
openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network 2015-10-13
11:10:15.784957130 -0600
+++
openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network 2015-10-15
08:35:48.341341581 -0600
@@ -217,7 +217,7 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
;;
-
+ nixcorex1 |\
vocore)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
diff -uprN openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh
openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh
---
openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh 2015-10-13
11:10:15.784957130 -0600
+++
openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh 2015-10-15
08:36:21.021340613 -0600
@@ -232,6 +232,9 @@ ramips_board_detect() {
*"Nexx WT3020")
name="wt3020"
;;
+ *"NixcoreX1")
+ name="nixcorex1"
+ ;;
*"NW718")
name="nw718"
;;
diff -uprN
openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh
openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh
---
openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh 2015-10-13
11:10:15.784957130 -0600
+++
openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh 2015-10-15
08:37:00.029339459 -0600
@@ -72,6 +72,7 @@ platform_check_image() {
mr-102n | \
mzk-w300nh2 | \
nbg-419n | \
+ nixcorex1 | \
nw718 | \
omni-emb | \
omni-emb-hpm | \
diff -uprN openwrt_vanilla/target/linux/ramips/image/Makefile
openwrt_submit/target/linux/ramips/image/Makefile
--- openwrt_vanilla/target/linux/ramips/image/Makefile 2015-10-13
11:10:15.788957130 -0600
+++ openwrt_submit/target/linux/ramips/image/Makefile 2015-10-15
08:37:25.885338693 -0600
@@ -569,6 +569,8 @@ Image/Build/Profile/MZKW300NH2=$(call Bu
Image/Build/Profile/NCS601W=$(call
BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
+Image/Build/Profile/NIXCORE-X1=$(call
BuildFirmware/Default8M/$(1),$(1),nixcorex1,NIXCORE-X1)
+
nw718_mtd_size=3801088
Image/Build/Profile/NW718=$(call
BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
@@ -741,6 +743,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MZKW300NH2,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NCS601W,$(1))
+ $(call Image/Build/Profile/NIXCORE-X1,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNI-EMB,$(1))
$(call Image/Build/Profile/OMNI-PLUG,$(1))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
