Hi Jow, Thanks a lot for the reply. I have tried the switch command but getting failed response as below: root@openwrt:/# swconfig dev switch0 port 1 get link failed root@openwrt:/# swconfig dev switch0 port 2 get link failed root@openwrt:/# swconfig dev switch0 port 3 get link failed root@openwrt:/# swconfig dev switch0 port 4 get link failed
Do i need to change the /etc/config/network file which i share in previous mail. One more thing, the switch command below both are same, then how will get to know differentiate between WAN and LAN. WAN: swconfig dev switch0 port 1 get link LAN: swconfig dev switch0 port 1 get link Could you please guide, as I newbie to this. Regards, Afkar On Wed, Oct 28, 2015 at 11:29 PM, Jo-Philipp Wich <j...@openwrt.org> wrote: > Hi Afkar, > > WAN: > > swconfig dev switch0 port 1 get link > > LAN: > > swconfig dev switch0 port 1 get link > swconfig dev switch0 port 2 get link > swconfig dev switch0 port 3 get link > swconfig dev switch0 port 4 get link > > > ~ Jow >
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
