Le 28/10/2015 19:32, Yousong Zhou a écrit : > On 29 October 2015 at 00:19, Florian Fainelli <[email protected]> wrote: >> On Oct 28, 2015 5:56 AM, "Yousong Zhou" <[email protected]> wrote: >>> >>> This is almost the default config of OpenWrt targets (currently even >>> those sunxi boards with only one ethernet interface use static IP >>> address for its lan interface). >> >> And this is intend intended, because Malta is primarily used under qemu, >> from which you get your network to be NAT'd or bridged from/with the host. >> Your change would force an user to reconfigure the network on boot, and that >> seems like a less sensible default to me. >> > > The current default is not that sensible anyway. If I understand it > correctly, many packages in OpenWrt assume that lan is for the > "internal" part of the network map, e.g. by default, dnsmasq will > serve DHCP requests on lan interface, firewall will also allow > forwarding on lan interface. A workaround can be making eth0 the > default wan interface.
But then again, by making eth0 the default wan interface, this is enforcing a specific model of the networking, and with QEMU this is a lot more flexible than that. Since there does not see to be a good answer, then let's go with your changes and I will do my local changes if I am unhappy with these... -- Florian _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
