Hi,
ugly patch to make an ugly driver work. i am sure you had a lot of fun
debugging this one. thanks !
John
On 13/11/2015 08:55, Kirill Berezin wrote:
> Hello,
>
> It turned out that mtk_nand driver uses some sophisticated accounting
> and a general nand code must be patched.
>
> This patch adds required read and erase calls to a general nand code. I
> used a code for re6500 released by Linksys as a reference.
>
> All required operations (erase, write and read) are usable. However I
> found that jffs2 filesystem can be created only on top of a ubi volume.
> I tried to create jffs2 directly on mtd device but pages with clean
> markers are became uncorrectable.
>
> This patch also includes changes that I sent earlier.
>
> Best regards,
> Kirill.
>
> Signed-off-by: Kirill Berezin ([email protected] <mailto:[email protected]>)
>
>
>
>
>
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
