netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device.
Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs tested not working * jffs2 oob erase marker error * openwrt setting(luci) reset after reboot Signed-off-by: YounJae Rho <[email protected]> --- I tested it in trunk commit 2c868ebd6f1132e19f120774e98253136b1fcc88 MTK_NAND should be patched to compile target/linux/ramips/base-files/etc/board.d/01_leds | 3 +- .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/WF-2881.dts | 123 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 6 +- target/linux/ramips/mt7621/config-3.18 | 4 +- target/linux/ramips/mt7621/profiles/netis.mk | 20 ++++ 9 files changed, 159 insertions(+), 3 deletions(-) create mode 100644 target/linux/ramips/dts/WF-2881.dts create mode 100644 target/linux/ramips/mt7621/profiles/netis.mk diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 5627c8c..a365c61 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -44,7 +44,8 @@ air3gii) all0239-3g|\ hw550-3g|\ mofi3500-3gn|\ -sap-g3200u3) +sap-g3200u3|\ +wf-2881) set_usb_led "$board:green:usb" ;; all0256n) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 3821742..45778f3 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -78,6 +78,7 @@ ramips_setup_interfaces() oy-0001|\ pbr-m1|\ sap-g3200u3|\ + wf-2881|\ whr-300hp2|\ whr-600d|\ wsr-1166|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 3013d24..ff5fbf2 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -155,6 +155,7 @@ get_status_led() { tew-692gr|\ ur-326n4g|\ ur-336un|\ + wf-2881|\ wr512-3gn) status_led="$board:green:wps" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index a1bcb72..eb2f194 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -376,6 +376,9 @@ ramips_board_detect() { *"WCR-150GN") name="wcr-150gn" ;; + *"WF-2881") + name="wf-2881" + ;; *"WHR-1166D") name="whr-1166d" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 0e8d619..19ab5a2 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -108,6 +108,7 @@ platform_check_image() { w150m|\ w306r-v20|\ w502u|\ + wf-2881|\ whr-1166d|\ whr-300hp2|\ whr-600d|\ diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts new file mode 100644 index 0000000..52d04e7 --- /dev/null +++ b/target/linux/ramips/dts/WF-2881.dts @@ -0,0 +1,123 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "NETIS WF-2881"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + palmbus@1E000000 { + spi@b00 { + status="disabled"; + }; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + nand@1e003000 { + compatible = "mtk,mt7621-nand"; + bank-width = <2>; + reg = <0x1e003000 0x800 + 0x1e003800 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x1000>; + read-only; + }; + + partition@80000 { + label = "config"; + reg = <0x80000 0x80000>; + read-only; + }; + + factory: partition@100000 { + label = "factory"; + reg = <0x100000 0x40000>; + read-only; + }; + + partition@140000 { + label = "firmware"; + reg = <0x140000 0x7E00000>; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe006>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + usb { + label = "wf-2881:green:usb"; + gpios = <&gpio0 6 1>; + }; + + wps { + label = "wf-2881:green:wps"; + gpios = <&gpio0 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uart3", "jtag"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 5e19c3f..be0347c 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -952,7 +952,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881 endif define Device/mt7621 @@ -1007,6 +1007,10 @@ define Device/zbt-wg2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) endef +define Device/wf-2881 + DTS := WF-2881 +endef + # # MT7628 Profiles # diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-3.18 index fb05d1e..bf1b3f9 100644 --- a/target/linux/ramips/mt7621/config-3.18 +++ b/target/linux/ramips/mt7621/config-3.18 @@ -117,18 +117,20 @@ CONFIG_MIPS_MT_FPAFF=y CONFIG_MIPS_MT_SMP=y CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y # CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MTK_MTD_NAND is not set CONFIG_MODULES_USE_ELF_REL=y CONFIG_MT7621_WDT=y # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_TRX_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTK_MTD_NAND=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NET_FLOW_LIMIT=y CONFIG_NET_RALINK=y diff --git a/target/linux/ramips/mt7621/profiles/netis.mk b/target/linux/ramips/mt7621/profiles/netis.mk new file mode 100644 index 0000000..a46fc4f --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/netis.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WF-2881 + NAME:=NETIS WF-2881 + PACKAGES:=\ + kmod-usb-core kmod-usb3 kmod-usb-hid \ + kmod-ledtrig-usbdev +endef + +define Profile/WF-2881/Description + Package set compatible with the NETIS WF-2881 board. +endef + +$(eval $(call Profile,WF-2881)) + 2015-11-22 오전 3:12에 John Crispin 이(가) 쓴 글: > Hi, > > the patch does not apply. is this against trunk or CC ? > > John > > On 14/11/2015 15:32, YounJaeRho wrote: >> netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. >> It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. >> The following patch adds support for this device. >> >> Tested and working: >> * ethernet >> * both WiFi radios >> * USB 3.0 >> * buttons (reset button) >> * ethernet switch and USB diag LEDs >> * UART >> * GPIOs >> >> >> Signed-off-by: YounJae Rho <[email protected]> >> --- >> Violation of alphabet ordering, indentation, naming, etc from previous >> version are resolved. >> Thanks Piotr Dymacz. >> >> >> target/linux/ramips/base-files/etc/board.d/01_leds | 3 +- >> .../linux/ramips/base-files/etc/board.d/02_network | 1 + >> target/linux/ramips/base-files/etc/diag.sh | 1 + >> target/linux/ramips/base-files/lib/ramips.sh | 3 + >> .../ramips/base-files/lib/upgrade/platform.sh | 1 + >> target/linux/ramips/dts/WF-2881.dts | 123 >> +++++++++++++++++++++ >> target/linux/ramips/image/Makefile | 6 +- >> target/linux/ramips/mt7621/config-3.18 | 4 +- >> target/linux/ramips/mt7621/profiles/netis.mk | 18 +++ >> 9 files changed, 157 insertions(+), 3 deletions(-) >> create mode 100644 target/linux/ramips/dts/WF-2881.dts >> create mode 100644 target/linux/ramips/mt7621/profiles/netis.mk >> >> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds >> b/target/linux/ramips/base-files/etc/board.d/01_leds >> index c75a993..f9f8e3e 100755 >> --- a/target/linux/ramips/base-files/etc/board.d/01_leds >> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds >> @@ -44,7 +44,8 @@ air3gii) >> all0239-3g|\ >> hw550-3g|\ >> mofi3500-3gn|\ >> -sap-g3200u3) >> +sap-g3200u3|\ >> +wf-2881) >> set_usb_led "$board:green:usb" >> ;; >> all0256n) >> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network >> b/target/linux/ramips/base-files/etc/board.d/02_network >> index 0732796..d3f8121 100755 >> --- a/target/linux/ramips/base-files/etc/board.d/02_network >> +++ b/target/linux/ramips/base-files/etc/board.d/02_network >> @@ -78,6 +78,7 @@ ramips_setup_interfaces() >> oy-0001|\ >> pbr-m1|\ >> sap-g3200u3|\ >> + wf-2881|\ >> whr-300hp2|\ >> whr-600d|\ >> wsr-1166|\ >> diff --git a/target/linux/ramips/base-files/etc/diag.sh >> b/target/linux/ramips/base-files/etc/diag.sh >> index 5376759..7d16f2c 100644 >> --- a/target/linux/ramips/base-files/etc/diag.sh >> +++ b/target/linux/ramips/base-files/etc/diag.sh >> @@ -150,6 +150,7 @@ get_status_led() { >> tew-692gr|\ >> ur-326n4g|\ >> ur-336un|\ >> + wf-2881|\ >> wr512-3gn) >> status_led="$board:green:wps" >> ;; >> diff --git a/target/linux/ramips/base-files/lib/ramips.sh >> b/target/linux/ramips/base-files/lib/ramips.sh >> index 340bc4c..5ee494e 100755 >> --- a/target/linux/ramips/base-files/lib/ramips.sh >> +++ b/target/linux/ramips/base-files/lib/ramips.sh >> @@ -373,6 +373,9 @@ ramips_board_detect() { >> *"WCR-150GN") >> name="wcr-150gn" >> ;; >> + *"WF-2881") >> + name="wf-2881" >> + ;; >> *"WHR-1166D") >> name="whr-1166d" >> ;; >> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh >> b/target/linux/ramips/base-files/lib/upgrade/platform.sh >> index d3d9df3..687642f 100755 >> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh >> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh >> @@ -107,6 +107,7 @@ platform_check_image() { >> w150m|\ >> w306r-v20|\ >> w502u|\ >> + wf-2881|\ >> whr-1166d|\ >> whr-300hp2|\ >> whr-600d|\ >> diff --git a/target/linux/ramips/dts/WF-2881.dts >> b/target/linux/ramips/dts/WF-2881.dts >> new file mode 100644 >> index 0000000..ba4a29b >> --- /dev/null >> +++ b/target/linux/ramips/dts/WF-2881.dts >> @@ -0,0 +1,123 @@ >> +/dts-v1/; >> + >> +/include/ "mt7621.dtsi" >> + >> +/ { >> + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; >> + model = "NETIS WF-2881"; >> + >> + memory@0 { >> + device_type = "memory"; >> + reg = <0x0 0x8000000>; >> + }; >> + >> + palmbus@1E000000 { >> + spi@b00 { >> + status="disabled"; >> + }; >> + }; >> + >> + chosen { >> + bootargs = "console=ttyS0,57600"; >> + }; >> + >> + nand@1e003000 { >> + compatible = "mtk,mt7621-nand"; >> + bank-width = <2>; >> + reg = <0x1e003000 0x800 >> + 0x1e003800 0x800>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + partition@0 { >> + label = "u-boot"; >> + reg = <0x0 0x30000>; >> + read-only; >> + }; >> + >> + partition@30000 { >> + label = "u-boot-env"; >> + reg = <0x30000 0x1000>; >> + read-only; >> + }; >> + >> + partition@80000 { >> + label = "config"; >> + reg = <0x80000 0x20000>; >> + read-only; >> + }; >> + >> + factory: partition@100000 { >> + label = "factory"; >> + reg = <0x100000 0x40000>; >> + read-only; >> + }; >> + >> + partition@140000 { >> + label = "firmware"; >> + reg = <0x140000 0x6EC0000>; >> + }; >> + }; >> + >> + pcie@1e140000 { >> + status = "okay"; >> + >> + pcie0 { >> + mt76@0,0 { >> + reg = <0x0000 0 0 0 0>; >> + device_type = "pci"; >> + mediatek,mtd-eeprom = <&factory 0x8000>; >> + mediatek,2ghz = <0>; >> + }; >> + }; >> + >> + pcie1 { >> + mt76@1,0 { >> + reg = <0x0000 0 0 0 0>; >> + device_type = "pci"; >> + mediatek,mtd-eeprom = <&factory 0x0000>; >> + mediatek,5ghz = <0>; >> + }; >> + }; >> + }; >> + >> + ethernet@1e100000 { >> + mtd-mac-address = <&factory 0xe006>; >> + }; >> + >> + gpio-leds { >> + compatible = "gpio-leds"; >> + >> + usb { >> + label = "wf-2881:green:usb"; >> + gpios = <&gpio0 6 1>; >> + }; >> + >> + wps { >> + label = "wf-2881:green:wps"; >> + gpios = <&gpio0 0 1>; >> + }; >> + }; >> + >> + gpio-keys-polled { >> + compatible = "gpio-keys-polled"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + poll-interval = <20>; >> + >> + reset { >> + label = "reset"; >> + gpios = <&gpio0 12 1>; >> + linux,code = <0x198>; >> + }; >> + }; >> + >> + pinctrl { >> + state_default: pinctrl0 { >> + gpio { >> + ralink,group = "uart3", "jtag"; >> + ralink,function = "gpio"; >> + }; >> + }; >> + }; >> +}; >> diff --git a/target/linux/ramips/image/Makefile >> b/target/linux/ramips/image/Makefile >> index c66409d..060a2a4 100644 >> --- a/target/linux/ramips/image/Makefile >> +++ b/target/linux/ramips/image/Makefile >> @@ -950,7 +950,7 @@ endif >> # >> >> ifeq ($(SUBTARGET),mt7621) >> - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 >> re6500 sap-g3200u3 >> + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 >> re6500 sap-g3200u3 wf-2881 >> endif >> >> define Device/mt7621 >> @@ -1000,6 +1000,10 @@ define Device/sap-g3200u3 >> DTS := SAP-G3200U3 >> endef >> >> +define Device/wf-2881 >> + DTS := WF-2881 >> +endef >> + >> # >> # MT7628 Profiles >> # >> diff --git a/target/linux/ramips/mt7621/config-3.18 >> b/target/linux/ramips/mt7621/config-3.18 >> index fb05d1e..bf1b3f9 100644 >> --- a/target/linux/ramips/mt7621/config-3.18 >> +++ b/target/linux/ramips/mt7621/config-3.18 >> @@ -117,18 +117,20 @@ CONFIG_MIPS_MT_FPAFF=y >> CONFIG_MIPS_MT_SMP=y >> CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y >> # CONFIG_MIPS_VPE_LOADER is not set >> -# CONFIG_MTK_MTD_NAND is not set >> CONFIG_MODULES_USE_ELF_REL=y >> CONFIG_MT7621_WDT=y >> # CONFIG_MTD_CFI_INTELEXT is not set >> CONFIG_MTD_CMDLINE_PARTS=y >> CONFIG_MTD_M25P80=y >> +CONFIG_MTD_NAND=y >> +CONFIG_MTD_NAND_ECC=y >> CONFIG_MTD_PHYSMAP=y >> CONFIG_MTD_SPI_NOR=y >> CONFIG_MTD_SPLIT_FIRMWARE=y >> CONFIG_MTD_SPLIT_SEAMA_FW=y >> CONFIG_MTD_SPLIT_TRX_FW=y >> CONFIG_MTD_SPLIT_UIMAGE_FW=y >> +CONFIG_MTK_MTD_NAND=y >> CONFIG_NEED_DMA_MAP_STATE=y >> CONFIG_NET_FLOW_LIMIT=y >> CONFIG_NET_RALINK=y >> diff --git a/target/linux/ramips/mt7621/profiles/netis.mk >> b/target/linux/ramips/mt7621/profiles/netis.mk >> new file mode 100644 >> index 0000000..6de40af >> --- /dev/null >> +++ b/target/linux/ramips/mt7621/profiles/netis.mk >> @@ -0,0 +1,18 @@ >> +# >> +# Copyright (C) 2015 OpenWrt.org >> +# >> +# This is free software, licensed under the GNU General Public License v2. >> +# See /LICENSE for more information. >> +# >> + >> +define Profile/WF-2881 >> + NAME:=NETIS WF-2881 >> + PACKAGES:=\ >> + kmod-usb-core kmod-usb3 kmod-usb-hid \ >> + kmod-ledtrig-usbdev >> +endef >> + >> +define Profile/WF-2881/Description >> + Package set compatible with the NETIS WF-2881 board. >> +endef >> +$(eval $(call Profile,WF-2881)) >> >> >> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
