Hi. That log contains: WARNING: Image file /platz/openwrt/edgerouter/build_dir/target-mipsel_1004kc+dsp_musl-1.1.11/linux-ramips_mt7621/tmp/openwrt-ramips-mt7621-firewrt-squashfs-sysupgrade.bin is too big which means that you may need to select fewer packakes to get loadable factory image. Using default set of packages seem to work. The problem is that factory image's kernel can only be 3MB, initramfs included - that's device limitation (or at least mine understanding of it).
Thanks. 2015-12-01 10:56 GMT-05:00 Stephan Oelze <[email protected]>: > thanks, still no factory image. > didnt read the log ( i am on handy :) ) > > http://pastebin.com/2MP1D0VE > > 2015-12-01 16:45 GMT+01:00 Nikolay Martynov <[email protected]>: >> >> Hi. >> >> I think the problem is that you do not have initramfs image turned >> on in build settings - could you please check that? >> >> Factory image requires initramfs image - comment on patch goes into >> some details onto why. This is a little bit awkward, but I couldn't >> find better way to achieve same thing. >> Hope this helps. >> >> Thank. >> >> 2015-12-01 7:41 GMT-05:00 Stephan Oelze <[email protected]>: >> > Hello! >> > >> > I found the time today, to check your patch against latest openwrt >> > trunk. >> > Patch used: >> > https://patchwork.ozlabs.org/patch/549621/ >> > >> > Compiles fine but ends up with: >> > WARNING: Kernel for image >> > >> > /platz/openwrt/edgerouter/build_dir/target-mipsel_1004kc+dsp_musl-1.1.11/linux-ramips_mt7621/tmp/openwrt-ramips-mt7621-ubnt-erx-squashfs-factory-initramfs.tar >> > not found >> > >> > more logging: >> > http://pastebin.com/AfehKzXZ >> > >> > There needs to be a fix? >> > >> > Thanks >> > Stephan >> > >> >> >> >> -- >> Martynov Nikolay. >> Email: [email protected] > > -- Martynov Nikolay. Email: [email protected] _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
