Am 02.12.2015 um 21:38 schrieb Andre Heider: > Unused since r46920.
I think the removal of the tone setup in r46920 should be reverted. It is still the only way to exactly control which pilot tones are sent by the DSL firmware. I would not trust the default setting of the dsl_cpe_control daemon. Especially in Germany you may not send a V43 tone on a Deutsche Telekom port according to 1TR112 specification, only B43 is allowed. > > Signed-off-by: Andre Heider <a.hei...@gmail.com> > --- > target/linux/lantiq/base-files/etc/uci-defaults/02_network | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network > b/target/linux/lantiq/base-files/etc/uci-defaults/02_network > index b22060c..4974b48 100644 > --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network > +++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network > @@ -41,13 +41,11 @@ EOF > set_vdsl_modem() { > local annex=$1 > local firmware=$2 > - local tone=$3 > local xfer_mode=$4 > uci batch <<EOF > set network.dsl='vdsl' > set network.dsl.annex='$annex' > set network.dsl.firmware='$firmware' > -set network.dsl.tone='$tone' > set network.dsl.xfer_mode='$xfer_mode' > EOF > } > @@ -198,7 +196,7 @@ esac > [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" > "$encaps" "$payload" > > if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then > - set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm" > + set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "ptm" > else > set_adsl_modem "$annex" "/lib/firmware/adsl.bin" > fi > -- - Daniel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel