Signed-off-by: Mathias Kresin <[email protected]>
---
Tested by my self with a "normal" VDSL2 line and by a user with a german 1&1
VDSL2 vectoring line:
/etc/init.d/dsl_control status
ATU-C Vendor ID: B5,00,42,44,43,4D,A4,61
ATU-C System Vendor ID: B5,00,42,44,43,4D,00,00
Chipset: Lantiq-VRX200 Unknown
Firmware Version: 5.7.3.3.0.7
API Version: 4.16.6.3
XTSE Capabilities: 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2
Annex: B
Line Mode: G.993.5 (VDSL2 with down- and
upstream vectoring)
Line State: UP [0x801: showtime_tc_sync]
Forward Error Correction Seconds (FECS): Near: 0 / Far: 1479
Errored seconds (ES): Near: 0 / Far: 89
Severely Errored Seconds (SES): Near: 0 / Far: 0
Loss of Signal Seconds (LOSS): Near: 0 / Far: 0
Unavailable Seconds (UAS): Near: 96 / Far: 96
Header Error Code Errors (HEC): Near: 0 / Far: 0
Non Pre-emtive CRC errors (CRC_P): Near: 0 / Far: 0
Pre-emtive CRC errors (CRCP_P): Near: 0 / Far: 0
Power Management Mode: L0 - Synchronized
Latency / Interleave Delay: Down: Interleave (0.15 ms) / Up:
Interleave (1.0 ms)
Data Rate: Down: 51.392 Mb/s / Up: 10.047 Mb/s
Line Attenuation (LATN): Down: 13.0dB / Up: 12.8dB
Signal Attenuation (SATN): Down: 13.0dB / Up: 12.6dB
Noise Margin (SNR): Down: 22.9dB / Up: 30.3dB
Aggregate Transmit Power(ACTATP): Down: 1.3dB / Up: 12.5dB
Max. Attainable Data Rate (ATTNDR): Down: 113.494 Mb/s / Up: 46.306 Mb/s
Line Uptime Seconds: 341
Line Uptime: 5m 41s
target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
index 22e65cb..c6996e8 100755
--- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
+++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
@@ -160,6 +160,9 @@ xtse() {
local annex_s=""
local line_mode_s=""
+ local vector_s=""
+
+ local dsmsg=""
local cmd=""
xtusesg=$(dsl_cmd g997xtusesg)
@@ -256,7 +259,15 @@ xtse() {
fi
if [ $((xtse8 & 7)) != 0 ]; then
- line_mode_s="$line_mode_s G.993.2 (VDSL2),"
+ dsmsg=$(dsl_cmd dsmsg)
+ vector_s=$(dsl_val "$dsmsg" eVectorStatus)
+
+ case "$vector_s" in
+ "0") line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
+ "1") line_mode_s="$line_mode_s G.993.5 (VDSL2 with
downstream vectoring)," ;;
+ "2") line_mode_s="$line_mode_s G.993.5 (VDSL2 with
down- and upstream vectoring)," ;;
+ *) line_mode_s="$line_mode_s unknown," ;;
+ esac
fi
#!!! PROPRIETARY & INTERMEDIATE USE !!!
--
1.9.1
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
