Hi Felix, On Mon, 2015-12-07 at 17:49 +0100, Felix Fietkau wrote: > On 2015-12-07 17:45, Alexey Brodkin wrote: > > ARC SDP board sports only 1 network interface - eth0, > > so to operate as an access point it requires at least > > another interface (preferably wireless), > > so USB Wi-Fi dongle is what we want. > > > > And with USB Wi-Fi dongle attached ARC SDP board could be > > used as a "dumb" wireless access point. > > > > Now with modified network setup script it is only required > > to enable wireless radio on the first boot with > > -------------->8------------ > > uci set wireless.radio0.disabled=0 > > uci commit wireless > > wifi > > -------------->8------------ > > > > Note if by the time initscripts are executed USB Wi-Fi > > dongle not yet recognized and set up by Linux kernel > > its autodetection by "wifi" tool may not happen > > automatically. In that case before issuing command above > > one needs to populate /etc/config/wireless config: > > -------------->8------------ > > wifi detect > /etc/config/wireless > > -------------->8------------ > > > > Signed-off-by: Alexey Brodkin <[email protected]> > > Cc: Felix Fietkau <[email protected]> > > Cc: Jo-Philipp Wich <[email protected]> > > Cc: Jonas Gorski <[email protected]> > > --- > > > > Changes compared to v1: > > * Rebased on top of current master > > > > target/linux/arc770/base-files/etc/board.d/02_network | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/target/linux/arc770/base-files/etc/board.d/02_network > > b/target/linux/arc770/base > > -files/etc/board.d/02_network > > index cd5ad2d..7c74d2d 100755 > > --- a/target/linux/arc770/base-files/etc/board.d/02_network > > +++ b/target/linux/arc770/base-files/etc/board.d/02_network > > @@ -11,6 +11,7 @@ board_config_update > > case "$( arc_board_name )" in > > "arc-sdp"*) > > ucidef_set_interface_lan "eth0" "dhcp" > > + uci set network.lan.type='bridge' > board.d files should not be calling uci, and I don't think this line > even works. By the way, I don't think such a change is needed anymore, > did you test the current code as-is?
Frankly I havent's tested it yet. >From that patch >http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=d0c35cbea6d55ddf2bff16e909ddf4feb6779aa5 I was under impression that this is only a matter of where init scripts were moved. BTW I should have named that patch v3, because v2 was sitting in patchwork for about 2 weeks already. And since "real" v2 patch does work, see http://patchwork.ozlabs.org/patch/548641/ (which is tested many times as of today) I floated "v3" right after rebase of my local repo. Any thoughts how I may setup a bridge on eth0 in init scripts in board.d? -Alexey _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
