Hi,
i was all exited then i read this mail and well, as usual mips is broken
On 11/12/2015 05:01, Nikolay Martynov wrote:
> Enables CPS multiprocessing instead ob obsoleted CMP for mt7621.
>
> This patch fixes a few issues currently existing on 4.3 kernel with at least
> ubnt-erx:
> * iperf shows only 50Mbits on direct gigabit connection to desktop,
> * ping times jump to 5-6ms to dorectly connected desktop
> * /proc/interrupts shows spurious interrups (ERR)
these are all blockers and make the mips support as unusable as always.
i'll just grab the 2 fixes from the series and ignore the rest until IMG
... after 4-5 years ... finally has time to add functional support for
their IP to the kernel.
would have been so amazing to have working CPS support but not yet
apparently
John
>
> Signed-off-by: Nikolay Martynov <[email protected]>
> ---
> target/linux/ramips/dts/mt7621.dtsi | 2 +-
> target/linux/ramips/mt7621/config-4.3 | 8 +-
> .../0001-arch-mips-ralink-add-mt7621-support.patch | 134
> +++------------------
> 3 files changed, 21 insertions(+), 123 deletions(-)
>
> diff --git a/target/linux/ramips/dts/mt7621.dtsi
> b/target/linux/ramips/dts/mt7621.dtsi
> index 1f2f5b5..53ac45c 100644
> --- a/target/linux/ramips/dts/mt7621.dtsi
> +++ b/target/linux/ramips/dts/mt7621.dtsi
> @@ -237,7 +237,7 @@
>
> gic: interrupt-controller@1fbc0000 {
> compatible = "mti,gic";
> - reg = <0x1fbc0000 0x80>;
> + reg = <0x1fbc0000 0x2000>;
>
> interrupt-controller;
> #interrupt-cells = <3>;
> diff --git a/target/linux/ramips/mt7621/config-4.3
> b/target/linux/ramips/mt7621/config-4.3
> index 3657460..f25850a 100644
> --- a/target/linux/ramips/mt7621/config-4.3
> +++ b/target/linux/ramips/mt7621/config-4.3
> @@ -5,10 +5,12 @@ CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
> # CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
> CONFIG_ARCH_HAS_RESET_CONTROLLER=y
> # CONFIG_ARCH_HAS_SG_CHAIN is not set
> +CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
> CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
> CONFIG_ARCH_REQUIRE_GPIOLIB=y
> CONFIG_ARCH_SUPPORTS_UPROBES=y
> +CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
> CONFIG_BOARD_SCACHE=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> @@ -117,7 +119,8 @@ CONFIG_LZO_DECOMPRESS=y
> CONFIG_MDIO_BOARDINFO=y
> CONFIG_MIPS=y
> CONFIG_MIPS_CM=y
> -CONFIG_MIPS_CMP=y
> +CONFIG_MIPS_CPC=y
> +CONFIG_MIPS_CPS=y
> CONFIG_MIPS_CPU_SCACHE=y
> CONFIG_MIPS_GIC=y
> CONFIG_MIPS_GIC_IPI=y
> @@ -226,9 +229,10 @@ CONFIG_SYS_HAS_CPU_MIPS32_R2=y
> CONFIG_SYS_HAS_EARLY_PRINTK=y
> CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
> CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
> +CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
> CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
> CONFIG_SYS_SUPPORTS_MIPS16=y
> -CONFIG_SYS_SUPPORTS_MIPS_CMP=y
> +CONFIG_SYS_SUPPORTS_MIPS_CPS=y
> CONFIG_SYS_SUPPORTS_MULTITHREADING=y
> CONFIG_SYS_SUPPORTS_SCHED_SMT=y
> CONFIG_SYS_SUPPORTS_SMP=y
> diff --git
> a/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
>
> b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
> index 67d816c..153dd9e 100644
> ---
> a/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
> +++
> b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
> @@ -120,7 +120,7 @@ Signed-off-by: John Crispin <[email protected]>
> choice
> prompt "Ralink SoC selection"
> default SOC_RT305X
> -@@ -34,6 +39,15 @@ choice
> +@@ -34,6 +39,14 @@ choice
> config SOC_MT7620
> bool "MT7620/8"
>
> @@ -129,14 +129,13 @@ Signed-off-by: John Crispin <[email protected]>
> + select MIPS_CPU_SCACHE
> + select SYS_SUPPORTS_MULTITHREADING
> + select SYS_SUPPORTS_SMP
> -+ select SYS_SUPPORTS_MIPS_CMP
> ++ select SYS_SUPPORTS_MIPS_CPS
> + select MIPS_GIC
> -+ select IRQ_GIC
> + select HW_HAS_PCI
> endchoice
>
> choice
> -@@ -65,6 +79,10 @@ choice
> +@@ -65,6 +78,10 @@ choice
> depends on SOC_MT7620
> select BUILTIN_DTB
>
> @@ -149,7 +148,7 @@ Signed-off-by: John Crispin <[email protected]>
> endif
> --- a/arch/mips/ralink/Makefile
> +++ b/arch/mips/ralink/Makefile
> -@@ -6,16 +6,21 @@
> +@@ -6,16 +6,20 @@
> # Copyright (C) 2009-2011 Gabor Juhos <[email protected]>
> # Copyright (C) 2013 John Crispin <[email protected]>
>
> @@ -161,8 +160,7 @@ Signed-off-by: John Crispin <[email protected]>
> obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
>
> +obj-$(CONFIG_IRQ_INTC) += irq.o
> -+obj-$(CONFIG_MIPS_GIC_IPI) += irq-gic.o
> -+obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o
> ++obj-$(CONFIG_MIPS_GIC) += irq-gic.o
> +
> obj-$(CONFIG_SOC_RT288X) += rt288x.o
> obj-$(CONFIG_SOC_RT305X) += rt305x.o
> @@ -185,136 +183,28 @@ Signed-off-by: John Crispin <[email protected]>
> +cflags-$(CONFIG_SOC_MT7621) +=
> -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
> --- /dev/null
> +++ b/arch/mips/ralink/irq-gic.c
> -@@ -0,0 +1,42 @@
> +@@ -0,0 +1,18 @@
> +#include <linux/init.h>
> -+#include <linux/sched.h>
> -+#include <linux/slab.h>
> -+#include <linux/interrupt.h>
> -+#include <linux/kernel_stat.h>
> -+#include <linux/hardirq.h>
> -+#include <linux/preempt.h>
> -+#include <linux/irqdomain.h>
> -+#include <linux/of_platform.h>
> -+#include <linux/of_address.h>
> -+#include <linux/of_irq.h>
> -+
> -+#include <asm/irq_cpu.h>
> -+#include <asm/mipsregs.h>
> +
> -+#include <asm/irq.h>
> -+#include <asm/setup.h>
> ++#include <linux/of.h>
> ++#include <linux/irqchip.h>
> +
> -+#include <asm/mips-cm.h>
> +#include <linux/irqchip/mips-gic.h>
> +
> -+#include <asm/mach-ralink/mt7621.h>
> -+
> -+extern int __init gic_of_init(struct device_node *node,
> -+ struct device_node *parent);
> -+
> +unsigned int get_c0_compare_int(void)
> +{
> + return gic_get_c0_compare_int();
> +}
> +
> -+static struct of_device_id __initdata of_irq_ids[] = {
> -+ { .compatible = "mti,cpu-interrupt-controller", .data =
> mips_cpu_irq_of_init },
> -+ { .compatible = "mti,gic", .data = gic_of_init },
> -+ {},
> -+};
> -+
> +void __init
> +arch_init_irq(void)
> +{
> -+ of_irq_init(of_irq_ids);
> ++ irqchip_init();
> +}
> ---- /dev/null
> -+++ b/arch/mips/ralink/malta-amon.c
> -@@ -0,0 +1,81 @@
> -+/*
> -+ * Copyright (C) 2007 MIPS Technologies, Inc.
> -+ * All rights reserved.
> -+
> -+ * This program is free software; you can distribute it and/or modify it
> -+ * under the terms of the GNU General Public License (Version 2) as
> -+ * published by the Free Software Foundation.
> -+ *
> -+ * This program is distributed in the hope it will be useful, but WITHOUT
> -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> -+ * for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License along
> -+ * with this program; if not, write to the Free Software Foundation, Inc.,
> -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
> -+ *
> -+ * Arbitrary Monitor interface
> -+ */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <linux/smp.h>
> -+
> -+#include <asm/addrspace.h>
> -+#include <asm/mips-boards/launch.h>
> -+#include <asm/mipsmtregs.h>
> -+
> -+int amon_cpu_avail(int cpu)
> -+{
> -+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
> +
> -+ if (cpu < 0 || cpu >= NCPULAUNCH) {
> -+ pr_debug("avail: cpu%d is out of range\n", cpu);
> -+ return 0;
> -+ }
> -+
> -+ launch += cpu;
> -+ if (!(launch->flags & LAUNCH_FREADY)) {
> -+ pr_debug("avail: cpu%d is not ready\n", cpu);
> -+ return 0;
> -+ }
> -+ if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) {
> -+ pr_debug("avail: too late.. cpu%d is already gone\n", cpu);
> -+ return 0;
> -+ }
> -+
> -+ return 1;
> -+}
> -+
> -+void amon_cpu_start(int cpu,
> -+ unsigned long pc, unsigned long sp,
> -+ unsigned long gp, unsigned long a0)
> -+{
> -+ volatile struct cpulaunch *launch =
> -+ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
> -+
> -+ if (!amon_cpu_avail(cpu))
> -+ return;
> -+ if (cpu == smp_processor_id()) {
> -+ pr_debug("launch: I am cpu%d!\n", cpu);
> -+ return;
> -+ }
> -+ launch += cpu;
> -+
> -+ pr_debug("launch: starting cpu%d\n", cpu);
> -+
> -+ launch->pc = pc;
> -+ launch->gp = gp;
> -+ launch->sp = sp;
> -+ launch->a0 = a0;
> -+
> -+ smp_wmb(); /* Target must see parameters before go */
> -+ launch->flags |= LAUNCH_FGO;
> -+ smp_wmb(); /* Target must see go before we poll */
> -+
> -+ while ((launch->flags & LAUNCH_FGONE) == 0)
> -+ ;
> -+ smp_rmb(); /* Target will be updating flags soon */
> -+ pr_debug("launch: cpu%d gone!\n", cpu);
> -+}
> --- /dev/null
> +++ b/arch/mips/ralink/mt7621.c
> -@@ -0,0 +1,209 @@
> +@@ -0,0 +1,213 @@
> +/*
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> @@ -432,6 +322,10 @@ Signed-off-by: John Crispin <[email protected]>
> + { 0 }
> +};
> +
> ++phys_addr_t mips_cpc_default_phys_base() {
> ++ panic("Cannot detect cpc address");
> ++}
> ++
> +void __init ralink_clk_init(void)
> +{
> + int cpu_fdiv = 0;
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
