On 05/12/2015 12:04, Vittorio G (VittGam) wrote:
> The failsafe VLAN workaround is not needed on HT-TM02 (RT5350); it actually
> breaks
> failsafe since this router has only one port and it is 4 and not 0.
>
> Anyway, it seems that the workaround is still needed for other routers (see
> https://patchwork.ozlabs.org/patch/424017/ for a previous attempt at removal
> of
> the whole workaround).
>
> So this patch explicitly whitelists the HT-TM02 from getting the VLAN
> workaround.
>
> This makes failsafe work correctly on it via the ethernet port.
>
> Signed-off-by: Vittorio Gambaletta <[email protected]>
>
> ---
>
> Please apply to both trunk and CC.
>
> --- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
> +++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
> @@ -11,7 +11,7 @@ ramips_set_preinit_iface() {
> swconfig dev rt305x set reset 1
> fi
>
> - if echo $RT3X5X | egrep -q "(RT5350|MT7628|MT7688)"; then
> + if echo $RT3X5X | egrep -q "(RT5350|MT7628|MT7688)" && [
> "$(ramips_board_name)" != "ht-tm02" ]; then
Hi,
hardcoding the board id here is not a good idea. we should rather use
the board.json data to probe if a switch is registered. if not we dont
apply the hack. i'll ask jow to tell us how to probe for a switch.
John
> # This is a dirty hack to get by while the switch
> # problem is investigated. When VLAN is disabled, ICMP
> # pings work as expected, but TCP connections time
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
