On 11/12/2015 19:36, Nikolay Martynov wrote: > 2015-12-11 13:33 GMT-05:00 John Crispin <[email protected]>: >> >> >> On 11/12/2015 17:31, Nikolay Martynov wrote: >>> 2015-12-11 11:29 GMT-05:00 John Crispin <[email protected]>: >>>> >>>> >>>> On 11/12/2015 17:25, Felix Fietkau wrote: >>>>> On 2015-12-11 05:01, Nikolay Martynov wrote: >>>>>> * Switches clocksource to gic timer. >>>>>> * Moves frequency definitions to dtsi since frequency was hardcoded >>>>>> anyway >>>>>> Will work on proper frequency detection later. >>>>>> >>>>>> Signed-off-by: Nikolay Martynov <[email protected]> >>>>> This patch breaks the SPI driver: >>>>> >>>>> [ 2.980000] spi-mt7621 1e000b00.spi: unable to get SYS clock, err=0 >>>>> >>>>> - Felix >>>>> >>>> >>>> strange, worked for me earlier today. but maybe i missed this one. >>> I'm sorry, the device I have doesn't have spi, so I could not really >>> test this part. But it should be trivial to fix. I'll have a look >>> tonight unless this gets fixed before. >>> >>> >> >> we need to define a fixed-rate clock using DT and load >> drivers/clk/clk-fixed-rate.c additionally we need to point the 3 device >> nodes at that clock. > > Yeah, looks like it's not as trivial as I thought it would be, but I > think I can handle that if you are fine waiting several hours :). >
if you dont have the hw it will be hard to test. i can have a look at it tomorrow. i think we need to just add a node defining the fixed-rate clock and then point the 3 other nodes at it and load the driver. pages 25/6/7 explain this -> http://elinux.org/images/b/b8/Elc2013_Clement.pdf _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
