Hi Gerhard,
On Sat, 19 Dec 2015, Gerhard Bertelsmann wrote:
Hi,
I have a problem with my BananaPi rebooting with actual trunk (r47935):
[...]
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
data abort
pc : [<7f67945c>] lr : [<7f6b1040>]
reloc pc : [<4a01845c>] lr : [<4a050040>]
sp : 7f238cd8 ip : 00000001 fp : 00000018
r10: 7f26f480 r9 : 7f240ee0 r8 : 00000000
r7 : 00000000 r6 : 7f26f538 r5 : 7f26f4d0 r4 : 00000018
r3 : 7f26f3d0 r2 : 7f6b1140 r1 : 00000021 r0 : 7f6b1143
Flags: Nzcv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
U-Boot SPL 2015.07 (Dec 19 2015 - 13:25:28)
###################################################################
The BananaPi loops, throw the exception and can't boot the image -> boots
again.
If I power cycle the BPi everything is fine and the BPi boots.
Until I reboot -> it loops again.
If I switch to GCC 4_8_LINARO everything is fine - strange.
Does anybody know why the BPi behaves so strange ?
Which BPi model is this, standard BananaPi or BananaPro?
Thanks,
Zoltan H
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
