There is a patch added here to ath10k to bypass some checks on startup. I
believe this is related to the calibration data being provided in external
files (dumped from the ART mtd partition at init time) rather than directly
from the pcie board. The patch and related discussion is from here:
http://lists.infradead.org/pipermail/ath10k/2015-November/006489.html. This
has also been discussed a bit further on the ath10k list here:
http://lists.infradead.org/pipermail/ath10k/2015-December/006613.html.
Signed-off-by: Josh Bendavid <joshbenda...@gmail.com>
---
.../kernel/mac80211/patches/941-ath10k_skip_otp_check.patch | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644
package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch
diff --git a/package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch
b/package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch
new file mode 100644
index 0000000..ffe783d
--- /dev/null
+++ b/package/kernel/mac80211/patches/941-ath10k_skip_otp_check.patch
@@ -0,0 +1,13 @@
+--- a/drivers/net/wireless/ath/ath10k/core.c
++++ b/drivers/net/wireless/ath/ath10k/core.c
+@@ -1800,9 +1800,8 @@
+
+ ret = ath10k_core_get_board_id_from_otp(ar);
+ if (ret && ret != -EOPNOTSUPP) {
+- ath10k_err(ar, "failed to get board id from otp: %d\n",
++ ath10k_err(ar, "failed to get board id from otp: %d,
ignoring\n",
+ ret);
+- return ret;
+ }
+
+ ret = ath10k_core_fetch_board_file(ar);
--
2.6.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
