The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it. (Note that GPIO0 is actually connected to the RESET button.)
Signed-off-by: John Clark <[email protected]> --- target/linux/ramips/dts/HLKRM04.dts | 9 --------- 1 file changed, 9 deletions(-) diff --git a/target/linux/ramips/dts/HLKRM04.dts b/target/linux/ramips/dts/HLKRM04.dts index f90a9ac..7996f99 100644 --- a/target/linux/ramips/dts/HLKRM04.dts +++ b/target/linux/ramips/dts/HLKRM04.dts @@ -94,13 +94,4 @@ linux,code = <0x198>; }; }; - - gpio-leds { - compatible = "gpio-leds"; - - power { - label = "hlk-rm04:red:power"; - gpios = <&gpio0 0 1>; - }; - }; }; -- 2.4.3 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
