Wow, you really can't get away with much these days....:(
BTW I didn't just change the subject I blanked out the entire message as well :P
I'll start a fresh thread once I've compiled and tested the earlier trunk commit, which I am about to begin now.
On 10/02/16 00:55, John Crispin wrote:
Hi Adam, please do not hijack threads. if you want to send us a mail then dont click Reply on an un-related thread and then change the subject. this will mess up patchwork, which did notice what you did ;) --> https://patchwork.ozlabs.org/patch/580275/ John On 09/02/2016 05:42, Adam Kuklycz wrote:All, I've compiled OpenWRT trunk version r48667 successfully and have noticed that when using PPPoE with native IPv6 that while IPv6 addresses are correctly assigned and also allocated out to client devices on the LAN, there is no default route for WAN6, and thus nothing can connect to the Internet via IPv6, including the router itself. This means that even when doing a ping6 or traceroute6 from the router, all external addresses show up as no route. Have attached the config used which I hope is nothing out of the ordinary... The last firmware I compiled and have work fine with IPv6 was r47245. I have reported this issue once before but that was quite some time ago...so I am surprised if this is a regression. Relevant parts of /etc/config/network (which work fine using r47245): config interface 'lan' option force_link '1' option type 'bridge' option proto 'static' option netmask '255.255.255.0' option ip6assign '64' option dns 'xxxxxxxxxxxxx' option ipaddr '172.18.18.1' option _orig_ifname 'eth0.1 wlan0 wlan0-1 wlan1' option _orig_bridge 'true' option ifname 'eth0.1' config interface 'wan' option _orig_ifname 'eth0.2' option _orig_bridge 'false' option proto 'pppoe' option username 'xxxxxxxxxxxxxxxxxxxxxxx' option password 'xxxxxxxxxxxxxx' option peerdns '0' option dns 'xxxxxxxxxxxx' option ifname 'eth0.2' option ipv6 'auto' config interface 'wan6' option proto 'dhcpv6' option dns 'xxxxxxxxxxxx' option peerdns '0' option reqaddress 'try' option reqprefix '64' option _orig_ifname '@wan' option _orig_bridge 'false' option ifname 'eth0.2' _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
