Hi,
weird, i am sure i had merged it. let me handle it just now. the server
issues did mess things up a bit.
John
On 16/02/2016 16:00, Joseph C. Lehner wrote:
> I've received a notification from patchwork that the patch status has
> been changed to "Accepted" 9 days ago, but it hasn't been merged yet.
>
> Since I have another patch depending on v4, should I submit v5, or wait
> until v4 has been merged and then submit a new patch?
>
> Regards
> Joseph
>
> On 2016-02-08 22:29, Joseph C. Lehner wrote:
>> This patch adds support for the Netgear EX2700 and builds an approriate
>> sysupgrade image.
>>
>> What's missing is the option to build a factory image flashable via the
>> router's stock web interface, but this approach is hindered by the fact
>> that u-boot operforms an additional integrity check, which expects a
>> uImage header in the last 64 bytes of the "kernel" partition, which
>> the bootloader expects to be 960k, a size exceeded by the standard
>> OpenWrt kernel.
>>
>> Signed-off-by: Joseph C. Lehner <[email protected]>
>>
>> ---
>> Changes for v4:
>> * Fix whitespace errors in netgear.mk
>>
>> Changes for v3:
>> * Fix led name in /etc/board.d/01_leds
>> * Cleanup device tree
>>
>> Changes for v2:
>> * Fix alphabetical ordering (image/Makefile is not really sorted, so I've
>> put the EX2700 immediately below the E1700).
>>
>> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
>> b/target/linux/ramips/base-files/etc/board.d/01_leds
>> index c3a81a4..b10f5f1 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
>> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
>> @@ -125,6 +125,10 @@ dir-810l|\
>> mzk-dp150n)
>> ucidef_set_led_default "power" "power" "$board:green:power" "1"
>> ;;
>> +ex2700)
>> + ucidef_set_led_default "power_r" "POWER (red)" "$board:red:power" "0"
>> + set_wifi_led "$board:green:router"
>> + ;;
>> f5d8235-v1|\
>> f5d8235-v2)
>> set_usb_led "$board:blue:storage"
>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>> b/target/linux/ramips/base-files/etc/board.d/02_network
>> index dafa3e9..9853729 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>> @@ -141,7 +141,8 @@ ramips_setup_interfaces()
>> ucidef_add_switch "switch0" \
>> "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
>> ;;
>> - cf-wr800n)
>> + cf-wr800n|\
>> + ex2700)
>> ucidef_add_switch "switch0" \
>> "4:lan" "6t@eth0"
>> ;;
>> diff --git a/target/linux/ramips/base-files/etc/diag.sh
>> b/target/linux/ramips/base-files/etc/diag.sh
>> index acc500b..59c5965 100644
>> --- a/target/linux/ramips/base-files/etc/diag.sh
>> +++ b/target/linux/ramips/base-files/etc/diag.sh
>> @@ -34,6 +34,7 @@ get_status_led() {
>> a5-v11|\
>> d105|\
>> dcs-930l-b1|\
>> + ex2700|\
>> hlk-rm04|\
>> mpr-a1|\
>> mpr-a2)
>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>> b/target/linux/ramips/base-files/lib/ramips.sh
>> index 8025a40..aed8350 100755
>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>> @@ -154,6 +154,9 @@ ramips_board_detect() {
>> *"ESR-9753")
>> name="esr-9753"
>> ;;
>> + *"EX2700")
>> + name="ex2700";
>> + ;;
>> *"F5D8235 v1")
>> name="f5d8235-v1"
>> ;;
>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> index 39b5f94..78edd22 100755
>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> @@ -51,6 +51,7 @@ platform_check_image() {
>> dir-810l|\
>> e1700|\
>> esr-9753|\
>> + ex2700|\
>> f7c027|\
>> firewrt|\
>> fonera20n|\
>> diff --git a/target/linux/ramips/dts/EX2700.dts
>> b/target/linux/ramips/dts/EX2700.dts
>> new file mode 100644
>> index 0000000..4b5a01a
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/EX2700.dts
>> @@ -0,0 +1,148 @@
>> +/*
>> + * Device Tree file for the Netgear EX2700
>> + *
>> + * Copyright (C) 2016 Joseph C. Lehner <[email protected]>
>> + *
>> + * This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without any
>> + * warranty of any kind, whether express or implied.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +/include/ "mt7620a.dtsi"
>> +
>> +/ {
>> + compatible = "ralink,mt7620a-soc";
>> + model = "Netgear EX2700";
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,57600";
>> + };
>> +
>> + palmbus@10000000 {
>> +
>> + gpio0: gpio@600 {
>> + status = "okay";
>> + };
>> +
>> + gpio1: gpio@638 {
>> + status = "okay";
>> + };
>> +
>> + spi@b00 {
>> + status = "okay";
>> +
>> + m25p80@0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "jedec,spi-nor";
>> + reg = <0 0>;
>> + linux,modalias = "m25p80", "mx25l3205d";
>> + spi-max-frequency = <10000000>;
>> +
>> + partition@0 {
>> + label = "u-boot";
>> + reg = <0x0 0x30000>;
>> + read-only;
>> + };
>> +
>> + partition@30000 {
>> + label = "u-boot-env";
>> + reg = <0x30000 0x10000>;
>> + read-only;
>> + };
>> +
>> + partition@40000 {
>> + label = "firmware";
>> + reg = <0x40000 0x3b0000>;
>> + };
>> +
>> + art: partition@3f0000 {
>> + label = "art";
>> + reg = <0x3f0000 0x10000>;
>> + read-only;
>> + };
>> + };
>> + };
>> + };
>> +
>> + ethernet@10100000 {
>> + mtd-mac-address = <&art 0x0>;
>> + };
>> +
>> + wmac@10180000 {
>> + ralink,mtd-eeprom = <&art 0x1000>;
>> + };
>> +
>> + pinctrl {
>> + state_default: pinctrl0 {
>> + default {
>> + // spi refclk: pins 37, 38, 39
>> + // uartf: pins 8, 9, 10, 11, 12, 13, 14
>> + // i2c: pins 1, 2
>> + ralink,group = "i2c", "uartf", "spi refclk";
>> + ralink,function = "gpio";
>> + };
>> + };
>> + };
>> +
>> + gpio-leds {
>> + compatible = "gpio-leds";
>> +
>> + power_g {
>> + label = "ex2700:green:power";
>> + gpios = <&gpio0 9 1>;
>> + default-state = "on";
>> + };
>> +
>> + power_r {
>> + label = "ex2700:red:power";
>> + gpios = <&gpio0 11 1>;
>> + };
>> +
>> + device_g {
>> + label = "ex2700:green:device";
>> + gpios = <&gpio0 13 1>;
>> + };
>> +
>> + device_r {
>> + label = "ex2700:red:device";
>> + gpios = <&gpio0 10 1>;
>> + };
>> +
>> + router_g {
>> + label = "ex2700:green:router";
>> + gpios = <&gpio0 12 1>;
>> + };
>> +
>> + router_r {
>> + label = "ex2700:red:router";
>> + gpios = <&gpio0 14 1>;
>> + };
>> +
>> + wps {
>> + label = "ex2700:green:wps";
>> + gpios = <&gpio1 15 1>;
>> + };
>> + };
>> +
>> + gpio-keys-polled {
>> + compatible = "gpio-keys-polled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + poll-interval = <20>;
>> +
>> + reset {
>> + label = "reset";
>> + gpios = <&gpio0 1 1>;
>> + linux,code = <0x198>;
>> + };
>> +
>> + wps {
>> + label = "wps";
>> + gpios = <&gpio0 2 1>;
>> + linux,code = <0x211>;
>> + };
>> + };
>> +};
>> diff --git a/target/linux/ramips/image/Makefile
>> b/target/linux/ramips/image/Makefile
>> index 55b9cf4..adeea25 100644
>> --- a/target/linux/ramips/image/Makefile
>> +++ b/target/linux/ramips/image/Makefile
>> @@ -913,6 +913,7 @@ endif
>> #
>>
>> Image/Build/Profile/E1700=$(call
>> BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
>> +Image/Build/Profile/EX2700=$(call
>> BuildFirmware/Default4M/$(1),$(1),ex2700,EX2700)
>> Image/Build/Profile/MT7620a=$(call
>> BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
>> Image/Build/Profile/MT7620a_MT7610e=$(call
>> BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
>> Image/Build/Profile/MT7620a_MT7530=$(call
>> BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
>> @@ -958,6 +959,7 @@ Image/Build/Profile/TINY-AC=$(call
>> BuildFirmware/Default8M/$(1),$(1),tiny-ac,TIN
>> ifeq ($(SUBTARGET),mt7620)
>> define Image/Build/Profile/Default
>> $(call Image/Build/Profile/E1700,$(1))
>> + $(call Image/Build/Profile/EX2700,$(1))
>> $(call Image/Build/Profile/MT7620a,$(1))
>> $(call Image/Build/Profile/MT7620a_MT7610e,$(1))
>> $(call Image/Build/Profile/MT7620a_MT7530,$(1))
>> diff --git a/target/linux/ramips/mt7620/profiles/netgear.mk
>> b/target/linux/ramips/mt7620/profiles/netgear.mk
>> new file mode 100644
>> index 0000000..590756a
>> --- /dev/null
>> +++ b/target/linux/ramips/mt7620/profiles/netgear.mk
>> @@ -0,0 +1,16 @@
>> +#
>> +# Copyright (C) 2016 OpenWrt.org
>> +#
>> +# This is free software, licensed under the GNU General Public License v2.
>> +# See /LICENSE for more information.
>> +#
>> +
>> +define Profile/EX2700
>> + NAME:=Netgear EX2700
>> + PACKAGES:=-kmod-usb-core -kmod-usb2 -kmod-usb-ohci -kmod-ledtrig-usbdev
>> +endef
>> +
>> +define Profile/EX2700/Description
>> + Support for Netgear EX2700
>> +endef
>> +$(eval $(call Profile,EX2700))
>>
>>
>> On 2016-02-08 08:44, John Crispin wrote:
>>> Hi,
>>>
>>> the patch is whitespace broken. please fix and resend
>>>
>>> John
>>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
