Hi Larry,
On 10/03/2016 19:34, L. D. Pinney wrote:
> This patch adds support for the OMYlink OMY-X1
>
> https://wiki.openwrt.org/toh/omylink/omy-x1
>
> http://www.omylink.com/
>
> Signed-off-by: L. D. Pinney <[email protected]>
> ---
>
> v2 change in mach-omy-x1.c suggested by Karl Palsson <[email protected]>
>
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 5 ++++
> target/linux/ar71xx/base-files/etc/board.d/02_network | 1 +
> target/linux/ar71xx/base-files/etc/diag.sh | 3 ++
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 ++
> target/linux/ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-4.1 | 1 +
> target/linux/ar71xx/config-4.4 | 1 +
> target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 9 ++++++
> target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 +
> target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c | 106
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 +
> target/linux/ar71xx/generic/profiles/omy.mk | 16 ++++++++++
> target/linux/ar71xx/image/Makefile | 8 +++++
> tools/firmware-utils/src/mktplinkfw.c | 6 ++++
The patch to mktplinkfw fails to apply. i merged some other patches in
my tree and it might be one of these causing the issue. please try to
rebase once i pushed the stuff tonight.
also debounce is now 33, which if fine i guess but for sake of
consistency we should see if 20 works aswell.
John
> 14 files changed, 162 insertions(+)
>
>
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index 6cec5df..efcc7bb 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -394,6 +394,11 @@ om5p-an)
> ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
> ;;
>
> +omy-x1)
> + ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
> + ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
> + ;;
> +
> qihoo-c301)
> ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
> ;;
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network
> b/target/linux/ar71xx/base-files/etc/board.d/02_network
> index 799d98e..56ea451 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/02_network
> +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
> @@ -384,6 +384,7 @@ gl-ar150 |\
> gl-domino |\
> gl-inet |\
> jwap003 |\
> +omy-x1 |\
> pb42 |\
> pb44 |\
> routerstation|\
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
> b/target/linux/ar71xx/base-files/etc/diag.sh
> index db69757..9167808 100644
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -214,6 +214,9 @@ get_status_led() {
> om5p-an)
> status_led="om5p:blue:power"
> ;;
> + omy-x1)
> + status_led="omy:green:power"
> + ;;
> onion-omega)
> status_led="onion:amber:system"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 804f622..8e9d1ea 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -120,6 +120,9 @@ tplink_board_detect() {
> "120000"*)
> model="MERCURY MAC1200R"
> ;;
> + "066602"*)
> + model="OMYlink OMY-X1"
> + ;;
> "3C0001"*)
> model="OOLITE"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 8a70502..c8687c9 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -333,6 +333,7 @@ platform_check_image() {
> gl-inet | \
> mc-mac1200r | \
> minibox-v1 |\
> + omy-x1 |\
> onion-omega | \
> oolite | \
> smart-300 | \
> diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
> index 0ccb278..a682c11 100644
> --- a/target/linux/ar71xx/config-4.1
> +++ b/target/linux/ar71xx/config-4.1
> @@ -108,6 +108,7 @@ CONFIG_ATH79_MACH_NBG460N=y
> CONFIG_ATH79_MACH_NBG6716=y
> CONFIG_ATH79_MACH_OM2P=y
> CONFIG_ATH79_MACH_OM5P=y
> +CONFIG_ATH79_MACH_OMY_X1=y
> CONFIG_ATH79_MACH_ONION_OMEGA=y
> CONFIG_ATH79_MACH_PB42=y
> CONFIG_ATH79_MACH_PB44=y
> diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
> index bef1863..73d552d 100644
> --- a/target/linux/ar71xx/config-4.4
> +++ b/target/linux/ar71xx/config-4.4
> @@ -111,6 +111,7 @@ CONFIG_ATH79_MACH_NBG460N=y
> CONFIG_ATH79_MACH_NBG6716=y
> CONFIG_ATH79_MACH_OM2P=y
> CONFIG_ATH79_MACH_OM5P=y
> +CONFIG_ATH79_MACH_OMY_X1=y
> CONFIG_ATH79_MACH_ONION_OMEGA=y
> CONFIG_ATH79_MACH_PB42=y
> CONFIG_ATH79_MACH_PB44=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> index 3d6dc4d..12f8c55 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
> @@ -843,6 +843,15 @@ config ATH79_MACH_OM5P
> select ATH79_DEV_M25P80
> select ATH79_DEV_WMAC
>
> +config ATH79_MACH_OMY_X1
> + bool "OMYlink OMY X1 support"
> + select SOC_AR934X
> + select ATH79_DEV_ETH
> + select ATH79_DEV_GPIO_BUTTONS
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> + select ATH79_DEV_WMAC
> +
> config ATH79_MACH_ONION_OMEGA
> bool "ONION OMEGA support"
> select SOC_AR933X
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> index c1bbee1..c24e80d 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
> @@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W300NH) +=
> mach-mzk-w300nh.o
> obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
> obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
> obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
> +obj-$(CONFIG_ATH79_MACH_OMY_X1) += mach-omy-x1.o
> obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o
> obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
> obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c
> b/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c
> new file mode 100644
> index 0000000..eede8e1
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c
> @@ -0,0 +1,106 @@
> +/*
> + * OMYlink OMY-X1 board support
> + *
> + * Copyright (C) 2016 L. D. Pinney <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +
> +
> +#define OMY_X1_GPIO_LED_POWER 19
> +#define OMY_X1_GPIO_LED_WAN 22
> +
> +#define OMY_X1_GPIO_BTN_RESET 17
> +
> +#define OMY_X1_KEYS_POLL_INTERVAL 33 /* msecs */
> +#define OMY_X1_KEYS_DEBOUNCE_INTERVAL (3 * OMY_X1_KEYS_POLL_INTERVAL)
> +
> +static const char *omy_x1_part_probes[] = {
> + "tp-link",
> + NULL,
> +};
> +
> +static struct flash_platform_data omy_x1_flash_data = {
> + .part_probes = omy_x1_part_probes,
> +};
> +
> +static struct gpio_led omy_x1_leds_gpio[] __initdata = {
> + {
> + .name = "omy:green:wan",
> + .gpio = OMY_X1_GPIO_LED_WAN,
> + .active_low = 1,
> + }, {
> + .name = "omy:green:power",
> + .gpio = OMY_X1_GPIO_LED_POWER,
> + .active_low = 1,
> + },
> +};
> +
> +static struct gpio_keys_button omy_x1_gpio_keys[] __initdata = {
> + {
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = OMY_X1_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = OMY_X1_GPIO_BTN_RESET,
> + .active_low = 1,
> + }
> +};
> +
> +static void __init omy_x1_setup(void)
> +{
> + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
> + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
> +
> + ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
> + AR934X_GPIO_FUNC_CLK_OBS4_EN);
> +
> + ath79_register_m25p80(&omy_x1_flash_data);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(omy_x1_leds_gpio),
> + omy_x1_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(1, OMY_X1_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(omy_x1_gpio_keys),
> + omy_x1_gpio_keys);
> +
> + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
> +
> + ath79_register_mdio(1, 0x0);
> +
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
> +
> + ath79_switch_data.phy4_mii_en = 1;
> + ath79_switch_data.phy_poll_mask = BIT(0);
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> + ath79_eth0_data.phy_mask = BIT(0);
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
> + ath79_register_eth(0);
> +
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> + ath79_register_eth(1);
> +
> + ath79_register_wmac(ee, mac);
> +
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_OMY_X1, "OMY-X1", "OMYlink OMY-X1",
> + omy_x1_setup);
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> index 97de9f0..0030e57 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
> @@ -114,6 +114,7 @@ enum ath79_mach_type {
> ATH79_MACH_OM2P, /* OpenMesh OM2P */
> ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */
> ATH79_MACH_OM5P, /* OpenMesh OM5P */
> + ATH79_MACH_OMY_X1, /* OMYlink OMY-X1 */
> ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
> ATH79_MACH_PB42, /* Atheros PB42 */
> ATH79_MACH_PB92, /* Atheros PB92 */
> diff --git a/target/linux/ar71xx/generic/profiles/omy.mk
> b/target/linux/ar71xx/generic/profiles/omy.mk
> new file mode 100644
> index 0000000..4055dfc
> --- /dev/null
> +++ b/target/linux/ar71xx/generic/profiles/omy.mk
> @@ -0,0 +1,16 @@
> +#
> +# Copyright (C) 2015 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/OMYX1
> + NAME:=OMYlink OMY-X1
> + PACKAGES:=
> +endef
> +
> +define Profile/OMYX1/Description
> + Package set optimized for the OMYlink OMY-X1.
> +endef
> +$(eval $(call Profile,OMYX1))
> diff --git a/target/linux/ar71xx/image/Makefile
> b/target/linux/ar71xx/image/Makefile
> index ca4437b..2987df0 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -531,6 +531,14 @@ define Device/minibox-v1
> endef
> TARGET_DEVICES += minibox-v1
>
> +define Device/omy-x1
> + $(Device/tplink-8mlzma)
> + BOARDNAME := OMY-X1
> + DEVICE_PROFILE := OMYX1
> + TPLINK_HWID := 0x06660201
> +endef
> +TARGET_DEVICES += omy-x1
> +
> define Device/onion-omega
> $(Device/tplink-16mlzma)
> BOARDNAME := ONION-OMEGA
> diff --git a/tools/firmware-utils/src/mktplinkfw.c
> b/tools/firmware-utils/src/mktplinkfw.c
> index 9fd5e38..692e48b 100644
> --- a/tools/firmware-utils/src/mktplinkfw.c
> +++ b/tools/firmware-utils/src/mktplinkfw.c
> @@ -35,6 +35,7 @@
> #define HWID_ANTMINER_S3 0x04440301
> #define HWID_GL_INET_V1 0x08000001
> #define HWID_GS_OOLITE_V1 0x3C000101
> +#define HWID_OMY_X1 0x06660201
> #define HWID_ONION_OMEGA 0x04700001
> #define HWID_TL_MR10U_V1 0x00100101
> #define HWID_TL_MR13U_V1 0x00130101
> @@ -430,6 +431,11 @@ static struct board_info boards[] = {
> .hw_rev = 1,
> .layout_id = "16Mlzma",
> }, {
> + .id = "OMY-X1",
> + .hw_id = HWID_OMY_X1,
> + .hw_rev = 1,
> + .layout_id = "8Mlzma",
> + }, {
> .id = "ONION-OMEGA",
> .hw_id = HWID_ONION_OMEGA,
> .hw_rev = 1,
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
