Am 21.04.2016 um 23:43 schrieb Vittorio Gambaletta (VittGam):
After recent patches, the status LED on this router would stay
switched off after boot is completed. A switched off status LED
often indicates a boot failure (eg. kernel panic), so fix this and
get back to the previous behaviour.
NAK
This change was intentional. Personally, I don't like the idea of using
the WPS led as permanent (running) status led. I've never tried it, but
I may be possible to use WPS with hostapd and show the status of the WPS
action using the WPS led. I like to prevent such a double use of leds.
The basic idea was to let the WPS led blink as long as the device boots
and switch it off at the time the boot has finished. Which means an
unsuccessful boot is indicated by a still blinking WPS led.
Mathias
Signed-off-by: Vittorio Gambaletta <[email protected]>
---
--- a/target/linux/lantiq/dts/TDW89X0.dtsi
+++ b/target/linux/lantiq/dts/TDW89X0.dtsi
@@ -8,6 +8,7 @@
/* the power led can't be controlled, use the wps led
instead */
boot = &wps;
failsafe = &wps;
+ running = &wps;
dsl = &dsl;
internet = &internet;
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
