PATCHv1: This patch adds support for the SamKnows version 8.0 Whitebox, built around the MT7621 platform. 2.4GHz appears to be working, albeit poorly; 5GHz not working yet.
PATCHv2: - Fixed LED name in DTS. PATCHv3: DTS: Syntax error fixed, LEDs and buttons mapped correctly now - diag.sh updated to blink WPS LED on boot - 2.4GHz wifi is working but txpower is stuck at 0, DTS ROM offset matches SamKnows firmware - 5GHz wifi not working, DTS pcie1,0 matches SamKnows firmware PATCHv4: - I didn't commit some fixes in PATCHv3, that's fixed now PATCHv5: - Added preinit hook to reset SamKnows Whitebox 8 u-boot boot counter to prevent soft brick by booting into nonexistent backup partition - Broke 2.4GHz WiFi but 5GHz sorta works (swapped pcie0/1 in DTS, needs further investigation, effective txpower is still 0) - Experimenting on wifi but that'll be a future patch, board boots fine now. PATCHv6: - Used init script to reset bootcount, preinit is too early to use fw-setenv PATCHv7: - Added model to sysupgrade. Tested thoroughly in general and I'm happy with this. Sorry for the many revisions. PATCHv8: - Added SamKnows recovery partition to partition table, in case someone specifically wants to send their bootloader to it - Fixed Wi-Fi by patching MT7602EN device ID (shows up as 7612) into mt76 kernel module (verified that signal strength on both bands is good, tested AP and STA modes PATCHv9: - Fixed LAN MAC address EEPROM offset - Fixed mt76 patch whitespace issues - Renamed mt76 patch to mt7602en to accurately reflect the physical chip it's supporting PATCHv10: - Removed mt76 patch in favor of upstream patch - I solemnly swear not to have to revision my patch >5 times every again Initial support for SamKnows Whitebox 8 Signed-off-by: Andrew Yong <m...@ndoo.sg> diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index a759bcc..9ad5974 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -24,7 +24,8 @@ linkits7688d | \ wsr-600 | \ wsr-1166 | \ br6425 | \ -miwifi-nano) +miwifi-nano | \ +sk-wb8) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000" ;; esac diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 47e1e6a..28db48f 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -247,6 +247,9 @@ rt-n14u) set_wifi_led "$board:blue:air" set_usb_led "$board:blue:usb" ;; +sk-wb8) + set_usb_led "$board:green:usb" + ;; tiny-ac) set_wifi_led "$board:orange:wifi" set_usb_led "$board:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index ee690f6..3cbf577 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -77,6 +77,7 @@ ramips_setup_interfaces() pbr-m1|\ psg1208|\ sap-g3200u3|\ + sk-wb8|\ wf-2881|\ whr-300hp2|\ whr-600d|\ @@ -314,6 +315,9 @@ ramips_setup_macs() lan_mac=$(macaddr_setbit_la "$lan_mac") wan_mac=$(mtd_get_mac_binary factory 32772) ;; + sk-wb8) + wan_mac=$(mtd_get_mac_binary factory 57350) + ;; tew-691gr) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 3) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index c638d16..e432fa6 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -79,6 +79,7 @@ get_status_led() { ;; awapn2403|\ dir-645|\ + sk-wb8|\ wrh-300cr) status_led="$board:green:wps" ;; diff --git a/target/linux/ramips/base-files/etc/init.d/bootcount b/target/linux/ramips/base-files/etc/init.d/bootcount new file mode 100755 index 0000000..b93e3c9 --- /dev/null +++ b/target/linux/ramips/base-files/etc/init.d/bootcount @@ -0,0 +1,11 @@ +#!/bin/sh /etc/rc.common +. /lib/ramips.sh + +START=99 + +start() { + local board=$(ramips_board_name) + if [ $board = "sk-wb8" ]; then + fw_setenv bootcount 0 + fi +} diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 0ac0f68..9d5421b 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -376,6 +376,9 @@ ramips_board_detect() { *"RUT5XX") name="rut5xx" ;; + *"SamKnows Whitebox 8") + name="sk-wb8" + ;; *"SAP-G3200U3") name="sap-g3200u3" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 86ea4a3..6036f73 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -112,6 +112,7 @@ platform_check_image() { rt-n56u|\ rut5xx|\ sap-g3200u3|\ + sk-wb8|\ sl-r7205|\ tew-691gr|\ tew-692gr|\ diff --git a/target/linux/ramips/dts/SK-WB8.dts b/target/linux/ramips/dts/SK-WB8.dts new file mode 100644 index 0000000..350cb4a --- /dev/null +++ b/target/linux/ramips/dts/SK-WB8.dts @@ -0,0 +1,127 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "SamKnows Whitebox 8"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + + partition@e30000 { + label = "recovery"; + reg = <0xe30000 0x1d0000>; + }; + + }; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wps { + label = "sk-wb8:green:wps"; + gpios = <&gpio1 14 1>; + }; + + usb { + label = "sk-wb8:green:usb"; + gpios = <&gpio1 15 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + wps { + label = "wps"; + gpios = <&gpio1 11 1>; + linux,code = <0x211>; + }; + reset { + label = "reset"; + gpios = <&gpio1 9 1>; + linux,code = <0x198>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci"; + ralink,function = "gpio"; + }; + }; + }; + +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 1b8d3da..a09f4ab 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -138,6 +138,12 @@ define Device/ubnt-erx endef TARGET_DEVICES += ubnt-erx +define Device/sk-wb8 + DTS := SK-WB8 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef +TARGET_DEVICES += sk-wb8 + # FIXME: is this still needed? define Image/Prepare #define Build/Compile diff --git a/target/linux/ramips/mt7621/profiles/sk-wb8.mk b/target/linux/ramips/mt7621/profiles/sk-wb8.mk new file mode 100644 index 0000000..aa2e45e --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/sk-wb8.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2016 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/SK-WB8 + NAME:=SamKnows Whitebox 8 + PACKAGES:=\ + kmod-usb-core kmod-usb3 \ + kmod-ledtrig-usbdev uboot-envtools +endef + +define Profile/SK-WB8/Description + Package set compatible with the SamKnows Whitebox 8. +endef +$(eval $(call Profile,SK-WB8)) _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel