Based on the vg3503j_gphy_led.sh script published in the VG3503J wiki
article, the OEM Firmware uses the following PHY led functionality:
gphy led 0: LINK/ACTIVITY
gphy led 1: LINK
gphy led 2: ACTIVITY
Signed-off-by: Mathias Kresin <[email protected]>
---
target/linux/lantiq/dts/VG3503J.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/target/linux/lantiq/dts/VG3503J.dtsi
b/target/linux/lantiq/dts/VG3503J.dtsi
index 780d838..62a336c 100644
--- a/target/linux/lantiq/dts/VG3503J.dtsi
+++ b/target/linux/lantiq/dts/VG3503J.dtsi
@@ -153,18 +153,18 @@
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g",
"ethernet-phy-ieee802.3-c22";
- lantiq,led0h = <0x42>;
- lantiq,led0l = <0x10>;
- lantiq,led2h = <0x20>;
- lantiq,led2l = <0x00>;
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g",
"ethernet-phy-ieee802.3-c22";
- lantiq,led0h = <0x42>;
- lantiq,led0l = <0x10>;
- lantiq,led2h = <0x20>;
- lantiq,led2l = <0x00>;
+ lantiq,led1h = <0x70>;
+ lantiq,led1l = <0x00>;
+ lantiq,led2h = <0x00>;
+ lantiq,led2l = <0x03>;
};
};
};
--
1.9.1
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
