This router only has one ethernet port, so a VLAN is useless here, now that the rt3050 TCP bug that happened without VLANs has been fixed for a very long time.
Add this router to the VLAN-less config that is used by other single-port routers. Also fix MAC address detection code since this router has no WAN port. Signed-off-by: Vittorio Gambaletta <[email protected]> --- --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -35,6 +35,7 @@ ramips_setup_interfaces() case $board in 3g150b|\ 3g300m|\ + a5-v11|\ all0256n|\ all5002|\ all5003|\ @@ -93,10 +94,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; - a5-v11) - ucidef_add_switch "switch0" \ - "0:lan" "6t@eth0" - ;; ar670w|\ ar725w|\ rt-n15|\ @@ -241,7 +238,6 @@ ramips_setup_macs() local wan_mac="" case $board in - a5-v11|\ bc2|\ broadway|\ d105|\ @@ -285,6 +281,7 @@ ramips_setup_macs() [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(macaddr_add "$lan_mac" 1) ;; + a5-v11|\ ht-tm02) lan_mac=$(cat /sys/class/net/eth0/address) ;; _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
