Actually there's a problem with this patch: the tabs have been converted
to spaces by your mailer, so it does not apply directly...
The patch on GitHub is fine by the way.
Cheers,
Vittorio
On 01/05/2016 23:59:27 CEST, Vittorio G (VittGam) wrote:
On 01/05/2016 23:36:05 CEST, Saverio Proto wrote:
This patch is also available here:
https://github.com/zioproto/openwrt15051-batman/commit/0281382bcaa139f0d1d3b589797af4c434747f3e
commit 0281382bcaa139f0d1d3b589797af4c434747f3e
Author: Saverio Proto <[email protected]>
Date: Sun May 1 23:14:19 2016 +0200
ramips: Fix IPv6 neighbor discovery on RT5350
IPv6 neighbor discovery needs working IPv6 multicast. The register FCT2
should be set to 0x2500C to let through "unknown IPv6 multicast" to
all ports. This is based on datasheet information:
https://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf
Signed-off-by: Saverio Proto <[email protected]>
Reviewed-by: Vittorio Gambaletta <[email protected]>
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
index ef13d23..d09eaf3 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -1360,7 +1360,7 @@ static const struct switch_dev_ops esw_ops = {
static struct rt305x_esw_platform_data rt3050_esw_data = {
/* All ports are LAN ports. */
.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE,
- .reg_initval_fct2 = 0x00d6500c,
+ .reg_initval_fct2 = 0x0002500c,
/*
* ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1,
* turbo mii off, rgmi 3.3v off
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
