Hi Josua,
On 04.05.2016 21:24, josua.maye...@gmail.com wrote:
From: Josua Mayer <josua.maye...@gmail.com>
Added gen_mvebu_sdcard_img.sh to create bootable sdcard images. It takes
the bootloader and partition images to create a bootable sdcard image.
Partition Layout:
p1: fat32: for kernel, dtb and boot config files if any
p2: squashfs: for openwrt
This change is developed for the Clearfog, but should work on all A38x
SoCs that can boot from mmc.
Signed-off-by: Josua Mayer <josua.maye...@gmail.com>
---
target/linux/mvebu/image/Makefile | 16 ++++
target/linux/mvebu/image/gen_mvebu_sdcard_img.sh | 100 +++++++++++++++++++++++
tools/Makefile | 1 +
3 files changed, 117 insertions(+)
create mode 100755 target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
diff --git a/target/linux/mvebu/image/Makefile
b/target/linux/mvebu/image/Makefile
index cb73c3b..fc5fded 100644
--- a/target/linux/mvebu/image/Makefile
+++ b/target/linux/mvebu/image/Makefile
@@ -107,6 +107,9 @@ define MMCProfile
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
$(call Image/Build/Profile,$(1)/Initramfs)
endif
+ ifneq ($(CONFIG_TARGET_ROOTFS_SQUASHFS),)
+ $(call Image/Build/squashfs)
+ endif
endef
define Image/Build/Profile/$(1)/Initramfs
@@ -114,6 +117,19 @@ define MMCProfile
cp $(KDIR)/uImage-initramfs-$(2) $(BIN_DIR)/$(IMG_PREFIX)-$(2)-initramfs
endef
+ define Image/Build/Profile/$(1)/squashfs
+ $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+ cp $(KDIR)/root.squashfs $(BIN_DIR)/$(IMG_PREFIX)-$(2)-root.squashfs
+ rm -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-boot.fat32
+ mkfs.fat -C $(BIN_DIR)/$(IMG_PREFIX)-$(2)-boot.fat32 $(shell echo
$$((4*1024)) # 4MB)
+ mcopy -i $(BIN_DIR)/$(IMG_PREFIX)-$(2)-boot.fat32 $(KDIR)/zImage ::
+ mcopy -i $(BIN_DIR)/$(IMG_PREFIX)-$(2)-boot.fat32 $(DTS_DIR)/$(2).dtb ::
+ ./gen_mvebu_sdcard_img.sh
"$(BIN_DIR)/$(IMG_PREFIX)-$(2)-squashfs-sdcard.img" \
+
"$(BIN_DIR)/uboot-mvebu-clearfog/openwrt-mvebu-clearfog-u-boot-spl.kwb" \
+ c "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-boot.fat32" \
+ 83 "$(BIN_DIR)/$(IMG_PREFIX)-$(2)-root.squashfs"
+ endef
+
Image generation script here requires u-boot binary to exist, but what
if one doesn't select u-boot to be generated? It would be better to
exclude it from generated sdcard image, it can be flashed anyway with dd
to beginning of the sd card.
Also one ext4 partition for boot and second one for rootfs would be
better than fat32 + squashfs on sdcard, both Marvell u-boot and
uboot-mvebu have support for loading kernel from ext4.
PROFILES_LIST += $(1)
endef
diff --git a/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
b/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
new file mode 100755
index 0000000..88d017a
--- /dev/null
+++ b/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
@@ -0,0 +1,100 @@
+#!/bin/bash -x
+#
+# Copyright (C) 2016 Josua Mayer
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA.
+#
+
+usage() {
+ echo "$0 <outfile> <bootloader> [<type_partitionN> <img_partitionN>]?"
+}
+
+# always require first 2 arguments
+# then in pairs up to 8 more for a total of up to 4 partitions
+if [ $# -lt 2 ] || [ $# -gt 10 ] || [ $((($#-2)%2)) -ne 0 ]; then
+ usage
+ exit 1
+fi
+
+# static settings
+SDCARD_HEADS=16
+SDCARD_SECTORS=63
+SDCARD_ALIGNMENT=4096
+
+# parameters
+OUTFILE="$1"
+BOOTLOADER="$2"
+# up to 4 partitions
+# when calculating size of images in Kilobytes, NEVER round down!
+PART1_TYPE=$3
+PART1_IMG="$4"
+PART1_SIZE=$((($(stat --print="%s" "$PART1_IMG")+1023)/1024))K
+PART2_TYPE=$5
+PART2_IMG="$6"
+PART2_SIZE=$((($(stat --print="%s" "$PART2_IMG")+1023)/1024))K
+PART3_TYPE=$7
+PART3_IMG="$8"
+PART3_SIZE=$((($(stat --print="%s" "$PART3_IMG")+1023)/1024))K
+PART4_TYPE=$9
+PART4_IMG="${10}"
+PART4_SIZE=$((($(stat --print="%s" "$PART4_IMG")+1023)/1024))K
+
+# So how many partitions were given?
+numparts=$((($#-2)/2))
+case $numparts in
+ 0)
+ set `ptgen -o "$OUTFILE" \
+ -h $SDCARD_HEADS -s $SDCARD_SECTORS -l
$SDCARD_ALIGNMENT`
+ dd of="$OUTFILE" if="$BOOTLOADER" bs=512 seek=1
conv=notrunc
+ ;;
+ 1)
+ set `ptgen -o "$OUTFILE" \
+ -h $SDCARD_HEADS -s $SDCARD_SECTORS -l
$SDCARD_ALIGNMENT \
+ -t $PART1_TYPE -p $PART1_SIZE`
+ dd of="$OUTFILE" if="$PART1_IMG" bs=512 seek=$(($1/512))
conv=notrunc
+ ;;
+ 2)
+ set `ptgen -o "$OUTFILE" \
+ -h $SDCARD_HEADS -s $SDCARD_SECTORS -l
$SDCARD_ALIGNMENT \
+ -t $PART1_TYPE -p $PART1_SIZE \
+ -t $PART2_TYPE -p $PART2_SIZE`
+ dd of="$OUTFILE" if="$BOOTLOADER" bs=512 seek=1
conv=notrunc
+ dd of="$OUTFILE" if="$PART1_IMG" bs=512
seek=$(($1/512)) conv=notrunc
+ dd of="$OUTFILE" if="$PART2_IMG" bs=512
seek=$(($2/512)) conv=notrunc
+ ;;
+ 3)
+ set `ptgen -o "$OUTFILE" \
+ -h $SDCARD_HEADS -s $SDCARD_SECTORS -l
$SDCARD_ALIGNMENT \
+ -t $PART1_TYPE -p $PART1_SIZE \
+ -t $PART2_TYPE -p $PART2_SIZE \
+ -t $PART3_TYPE -p $PART3_SIZE`
+ dd of="$OUTFILE" if="$BOOTLOADER" bs=512 seek=1
conv=notrunc
+ dd of="$OUTFILE" if="$PART1_IMG" bs=512
seek=$(($1/512)) conv=notrunc
+ dd of="$OUTFILE" if="$PART2_IMG" bs=512
seek=$(($2/512)) conv=notrunc
+ dd of="$OUTFILE" if="$PART3_IMG" bs=512
seek=$(($3/512)) conv=notrunc
+ ;;
+ 4)
+ set `ptgen -o "$OUTFILE" \
+ -h $SDCARD_HEADS -s $SDCARD_SECTORS -l
$SDCARD_ALIGNMENT \
+ -t $PART1_TYPE -p $PART1_SIZE \
+ -t $PART2_TYPE -p $PART2_SIZE \
+ -t $PART3_TYPE -p $PART3_SIZE \
+ -t $PART4_TYPE -p $PART4_SIZE`
+ dd of="$OUTFILE" if="$BOOTLOADER" bs=512 seek=1
conv=notrunc
+ dd of="$OUTFILE" if="$PART1_IMG" bs=512
seek=$(($1/512)) conv=notrunc
+ dd of="$OUTFILE" if="$PART2_IMG" bs=512
seek=$(($2/512)) conv=notrunc
+ dd of="$OUTFILE" if="$PART3_IMG" bs=512
seek=$(($3/512)) conv=notrunc
+ dd of="$OUTFILE" if="$PART4_IMG" bs=512
seek=$(($4/512)) conv=notrunc
+esac
diff --git a/tools/Makefile b/tools/Makefile
index 187655e..9a08573 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -38,6 +38,7 @@ tools-$(CONFIG_TARGET_x86) += qemu
tools-$(CONFIG_TARGET_mxs) += elftosb sdimage
tools-$(CONFIG_TARGET_brcm2708)$(CONFIG_TARGET_sunxi)$(CONFIG_TARGET_mxs) +=
mtools dosfstools
tools-$(CONFIG_TARGET_ar71xx) += lzma-old squashfs
+tools-$(CONFIG_TARGET_mvebu) += squashfs dosfstools
tools-y += lzma squashfs4
tools-$(BUILD_B43_TOOLS) += b43-tools
tools-$(BUILD_PPL_CLOOG) += ppl cloog
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
