Hey
I have tried do get openwrt working on my Fritzbox. Openwrt will start
Network and VDSL Modem is working. But WLAN ist not working. The Chip is
supported bei the ath9k driver. Any hint how I can get Wifi working ?
The board is based on a Lantiq vr9 soc.
Here are my bootlogs and patches against Openwrt.
root@OpenWrt:/# dmesg
[ 0.000000] Linux version 4.4.7 (sebastian@sebastian-desktop) (gcc
version 5.3.0 (OpenWrt GCC 5.3.0 r49296) ) #1 Fri May 6 22:23:36 UTC 2016
[ 0.000000] SoC: xRX200 rev 1.1
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019555 (MIPS 34Kc)
[ 0.000000] MIPS: machine is FRITZ7360SL - 1&1 HomeServer
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 804d6390, node_mem_map
81007a80
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases,
linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 32512
[ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00064202
[ 0.000000] Readback ErrCtl register=00064202
[ 0.000000] Memory: 123376K/131072K available (3764K kernel code,
164K rwdata, 1144K rodata, 1184K init, 211K bss, 7696K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 500MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041786 ns
[ 0.000012] sched_clock: 32 bits at 250MHz, resolution 4ns, wraps
every 8589934590ns
[ 0.007862] Calibrating delay loop... 332.54 BogoMIPS (lpj=665088)
[ 0.042318] pid_max: default: 32768 minimum: 301
[ 0.047171] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.053731] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.066663] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.076441] pinctrl core: initialized pinctrl subsystem
[ 0.082322] NET: Registered protocol family 16
[ 0.091448] pinctrl-xway 1e100b10.pinmux: Init done
[ 0.096999] dma-xway 1e104100.dma: Init done - hw rev: 7, ports: 7,
channels: 28
[ 0.206470] dcdc-xrx200 1f106a00.dcdc: Core Voltage : 1016 mV
[ 0.347018] usbcore: registered new interface driver usbfs
[ 0.352523] usbcore: registered new interface driver hub
[ 0.357878] usbcore: registered new device driver usb
[ 0.363254] PCI host bridge to bus 0000:00
[ 0.367244] pci_bus 0000:00: root bus resource [mem
0x1c000000-0x1cffffff]
[ 0.374158] pci_bus 0000:00: root bus resource [io 0x1d800000-0x1d8fffff]
[ 0.381101] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.387957] pci_bus 0000:00: No busn resource found for root bus,
will use [bus 00-ff]
[ 0.395990] pci 0000:00:00.0: [15d1:0011] type 01 class 0x060000
[ 0.396028] ifx_pcie_rc_class_early_fixup: fixed pcie host bridge to
pci-pci bridge
[ 0.413669] ifx_pcie_fixup_resource: fixup host controller
0000:00:00.0 (15d1:0011)
[ 0.421261] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.421831] pci 0000:01:00.0: [168c:ff1c] type 00 class 0x020000
[ 0.421921] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[ 0.422076] pci 0000:01:00.0: supports D1
[ 0.422096] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.422408] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.422448] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.422506] pci 0000:00:00.0: BAR 8: assigned [mem 0x1c000000-0x1c0fffff]
[ 0.429195] pci 0000:01:00.0: BAR 0: assigned [mem
0x1c000000-0x1c00ffff 64bit]
[ 0.436557] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.441574] pci 0000:00:00.0: bridge window [mem 0x1c000000-0x1c0fffff]
[ 0.448451] ifx_pcie_bios_map_irq port 0 dev 0000:00:00.0 slot 0 pin 1
[ 0.455100] ifx_pcie_bios_map_irq dev 0000:00:00.0 irq 144 assigned
[ 0.461453] ifx_pcie_bios_map_irq port 0 dev 0000:01:00.0 slot 0 pin 1
[ 0.468120] ifx_pcie_bios_map_irq dev 0000:01:00.0 irq 144 assigned
[ 0.475465] clocksource: Switched to clocksource MIPS
[ 0.482104] NET: Registered protocol family 2
[ 0.487318] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.494218] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.500593] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.507105] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.512945] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.519566] NET: Registered protocol family 1
[ 0.523906] PCI: CLS 0 bytes, default 32
[ 0.524343] gptu: totally 6 16-bit timers/counters
[ 0.529186] gptu: misc_register on minor 63
[ 0.533281] gptu: succeeded to request irq 126
[ 0.537770] gptu: succeeded to request irq 127
[ 0.542284] gptu: succeeded to request irq 128
[ 0.546798] gptu: succeeded to request irq 129
[ 0.551313] gptu: succeeded to request irq 130
[ 0.555829] gptu: succeeded to request irq 131
[ 0.561200] phy-xrx200 gphy-xrx200: requesting lantiq/vr9_phy11g_a1x.bin
[ 0.568479] phy-xrx200 gphy-xrx200: booting GPHY0 firmware at 7940000
[ 0.574822] phy-xrx200 gphy-xrx200: booting GPHY1 firmware at 7940000
[ 0.682305] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.715662] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.721392] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.734808] io scheduler noop registered
[ 0.738652] io scheduler deadline registered (default)
[ 0.744497] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112,
base_baud = 0) is a lantiq,asc
[ 0.753399] console [ttyLTQ0] enabled
[ 0.760723] bootconsole [early0] disabled
[ 0.769781] lantiq nor flash device: 01000000 at 10000000
[ 0.773915] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank.
Manufacturer ID 0x000001 Chip ID 0x002101
[ 0.783349] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.788476] Amd/Fujitsu Extended Query version 1.3.
[ 0.793512] number of CFI chips: 1
[ 0.796942] 4 ofpart partitions found on MTD device ltq_nor
[ 0.802478] Creating 4 MTD partitions on "ltq_nor":
[ 0.807360] 0x000000000000-0x000000020000 : "urlader"
[ 0.815754] 0x000000020000-0x000000f80000 : "firmware"
[ 0.836761] 2 eva-fw partitions found on MTD device firmware
[ 0.841008] 0x000000020000-0x0000001bfa74 : "kernel"
[ 0.847817] 0x0000001c0100-0x000000f80000 : "rootfs"
[ 0.853486] mtd: device 3 (rootfs) set to be root filesystem
[ 0.857792] 1 squashfs-split partitions found on MTD device rootfs
[ 0.863912] 0x000000460000-0x000000f80000 : "rootfs_data"
[ 0.871543] 0x000000f80000-0x000000fc0000 : "tffs (1)"
[ 0.877447] 0x000000fc0000-0x000001000000 : "tffs (2)"
[ 0.986126] libphy: lantiq,xrx200-mdio: probed
[ 0.996971] eth0: attached PHY [Generic PHY] (phy_addr=0:00, irq=-1)
[ 1.002324] eth0: attached PHY [Generic PHY] (phy_addr=0:01, irq=-1)
[ 1.072164] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4]
(phy_addr=0:11, irq=-1)
[ 1.140155] eth0: attached PHY [Lantiq XWAY VR9 GPHY 11G v1.4]
(phy_addr=0:13, irq=-1)
[ 1.148042] wdt 1f8803f0.watchdog: Init done
[ 1.153878] NET: Registered protocol family 10
[ 1.162382] NET: Registered protocol family 17
[ 1.165538] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.178060] 8021q: 802.1Q VLAN Support v1.8
[ 1.182319] found entry name -> annex=B
[ 1.186088] found entry name -> maca=BC:05:43:D7:1E:7C
[ 1.191177] found entry name -> macb=BC:05:43:D7:1E:7D
[ 1.196312] found entry name -> macwlan=BC:05:43:D7:1E:7E
[ 1.201706] found entry name -> macdsl=BC:05:43:D7:1E:7F
[ 1.207069] found entry name -> macwlan2=BC:05:43:D7:1E:81
[ 1.212501] found entry name -> wlan_key=4004584479108575
[ 1.223899] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
[ 1.233871] VFS: Mounted root (squashfs filesystem) readonly on
device 31:3.
[ 1.241380] Freeing unused kernel memory: 1184K (804f8000 - 80620000)
[ 2.417706] init: Console is alive
[ 2.420017] init: - watchdog -
[ 3.187559] eth0: port 1 got link
[ 3.974342] SCSI subsystem initialized
[ 3.989600] usbcore: registered new interface driver usb-storage
[ 3.997229] init: - preinit -
[ 4.510986] random: procd urandom read with 17 bits of entropy available
[ 7.816027] mount_root: jffs2 not ready yet, using temporary tmpfs
overlay
[ 7.836202] procd: - early -
[ 7.837807] procd: - watchdog -
[ 8.572768] procd: - ubus -
[ 8.627629] procd: - init -
[ 9.476796] IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq
Deutschland GmbH
[ 9.486752] NET: Registered protocol family 8
[ 9.489719] NET: Registered protocol family 20
[ 9.500912] PPP generic driver version 2.4.2
[ 9.511937] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.537506] Lantiq (VRX) DSL CPE MEI driver, version 1.4.8.5, (c)
2013 Lantiq Deutschland GmbH
[ 9.537506]
[ 9.537506] Lantiq CPE API Driver version: DSL CPE API V4.16.6.3
[ 9.558430]
[ 9.558430] Predefined debug level: 3
[ 9.569131] Loading modules backported from Linux version
v4.4-rc5-1913-gc8fdf68
[ 9.575144] Backport generated by backports.git
backports-20151218-0-g2f58d9d
[ 9.585694] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.596751] Infineon Technologies DEU driver version 2.0.0
[ 9.602828] IFX DEU DES initialized (multiblock).
[ 9.607104] IFX DEU AES initialized (multiblock).
[ 9.611236] IFX DEU ARC4 initialized (multiblock).
[ 9.615898] IFX DEU SHA1 initialized.
[ 9.619394] IFX DEU MD5 initialized.
[ 9.623068] IFX DEU SHA1_HMAC initialized.
[ 9.627173] IFX DEU MD5_HMAC initialized.
[ 9.637542] nf_conntrack version 0.5.0 (1946 buckets, 7784 max)
[ 9.663906] NET: Registered protocol family 24
[ 9.689430] xt_time: kernel timezone is -0000
[ 17.443364] jffs2_scan_eraseblock(): End of filesystem marker found
at 0x0
[ 17.448921] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 17.455397] jffs2_build_filesystem(): erasing all blocks after the
end marker...
[ 32.627514] random: nonblocking pool is initialized
[ 73.855188] done.
[ 73.855719] jffs2: notice: (926) jffs2_build_xattr_subsystem:
complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan)
and 0 of xref (0 dead, 0 orphan) found.
root@OpenWrt:/#
original bootlogs can bw found here:
http://www.wehavemorefun.de/fritzbox/7360_Bootlogs
Sebastian
diff -burN openwrt.orig/target/linux/lantiq/dts/FRITZ7360SL.dts openwrt.7360SL/target/linux/lantiq/dts/FRITZ7360SL.dts
--- openwrt.orig/target/linux/lantiq/dts/FRITZ7360SL.dts 1970-01-01 01:00:00.000000000 +0100
+++ openwrt.7360SL/target/linux/lantiq/dts/FRITZ7360SL.dts 2016-05-06 23:59:57.657292481 +0200
@@ -0,0 +1,207 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+ model = "FRITZ7360SL - 1&1 HomeServer";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+
+ leds {
+ boot = &power_green;
+ failsafe = &power_red;
+ running = &power_green;
+
+ internet = &info_green;
+ dsl = &power_green;
+ wifi = &wifi;
+ };
+ };
+
+ memory@0 {
+ reg = <0x0 0x8000000>;
+ };
+
+ fpi@10000000 {
+ localbus@0 {
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "urlader";
+ reg = <0x00000 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "firmware";
+ reg = <0x20000 0xf60000>;
+ };
+
+ partition@f80000 {
+ label = "tffs (1)";
+ reg = <0xf80000 0x40000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "tffs (2)";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ phy-rst {
+ lantiq,pins = "io37", "io44";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+ };
+ };
+
+ ifxhcd@E101000 {
+ status = "okay";
+ gpios = <&gpio 5 0
+ &gpio 14 0>;
+ lantiq,portmask = <0x3>;
+ };
+
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware = "lantiq/vr9_phy11g_a1x.bin";
+ phys = [ 00 01 ];
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ dect {
+ label = "power";
+ gpios = <&gpio 1 0>;
+ linux,code = <0x102>;
+ };
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 29 0>;
+ linux,code = <0x101>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_green: power {
+ label = "fritz7360:green:power";
+ gpios = <&gpio 32 1>;
+ default-state = "keep";
+ };
+ power_red: power2 {
+ label = "fritz7360:red:power";
+ gpios = <&gpio 33 1>;
+ };
+ info_red {
+ label = "fritz7360:red:info";
+ gpios = <&gpio 34 1>;
+ };
+ info_green: info_green {
+ label = "fritz7360:green:info";
+ gpios = <&gpio 47 1>;
+ };
+ wifi: wifi {
+ label = "fritz7360:green:wlan";
+ gpios = <&gpio 36 1>;
+ };
+ dect {
+ label = "fritz7360:green:dect";
+ gpios = <&gpio 35 1>;
+ };
+ };
+};
+
+ð0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ gpios = <&gpio 37 0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ gpios = <&gpio 44 0>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
diff -burN openwrt.orig/target/linux/lantiq/image/Makefile openwrt.7360SL/target/linux/lantiq/image/Makefile
--- openwrt.orig/target/linux/lantiq/image/Makefile 2016-05-06 20:59:31.092393770 +0200
+++ openwrt.7360SL/target/linux/lantiq/image/Makefile 2016-05-06 21:01:58.379599907 +0200
@@ -414,6 +414,9 @@
Image/BuildKernel/Profile/FRITZ3370=$(call Image/BuildKernelEVA/Template,FRITZ3370)
Image/Build/Profile/FRITZ3370=$(call Image/BuildEVA/$(1),$(1),FRITZ3370)
+Image/BuildKernel/Profile/FRITZ7360SL=$(call Image/BuildKernelEVA/Template,FRITZ7360SL)
+Image/Build/Profile/FRITZ7360SL=$(call Image/BuildEVA/$(1),$(1),FRITZ7360SL)
+
Image/BuildKernel/Profile/VG3503J=$(call Image/BuildKernelLoader/Template,VG3503J)
Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J)
diff -burN openwrt.orig/target/linux/lantiq/xrx200/profiles/avm.mk openwrt.7360SL/target/linux/lantiq/xrx200/profiles/avm.mk
--- openwrt.orig/target/linux/lantiq/xrx200/profiles/avm.mk 2016-05-06 20:59:31.099060310 +0200
+++ openwrt.7360SL/target/linux/lantiq/xrx200/profiles/avm.mk 2016-05-06 21:18:05.211243449 +0200
@@ -7,3 +7,10 @@
FRITZ3370_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
$(eval $(call Profile,FRITZ3370))
+
+define Profile/FRITZ7360SL
+ NAME:=1&1 HomeServer - FRITZ7360SL
+ PACKAGES:=kmod-ath9k wpad-mini kmod-usb-dwc2
+endef
+
+$(eval $(call Profile,FRITZ7360SL))
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
