Some OpenWrt based firmwares like Gluon expect that a sysupgrade image exists when a device firmware can be updated via sysupgrade. This image wasn't created until now because OpenMesh devices use the same image for factory and sysupgrade flash. Copying the image from *factory.bin to *sysupgrade.bin is therefore enough to make the sysupgrade functionality visible.
Reported-by: Matthias Schiffer <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> --- target/linux/ar71xx/image/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 1acc681..6acc199 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -2320,6 +2320,9 @@ define Image/Build/OpenMesh "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \ "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \ "$(KDIR)/root.$(1)" "rootfs" + if [ -e "$(call factoryname,$(1),$(2))" ]; then \ + cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \ + fi endef -- 2.8.1 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
