05.10.2016 06:36, Matthew McClintock:
On Sun, Sep 11, 2016 at 1:02 AM, Cezary Jackiewicz
<[email protected]> wrote:
Dnia 2016-09-11, o godz. 00:05:18
Matthew McClintock <[email protected]> napisał(a):
On Sat, Dec 12, 2015 at 1:53 AM, Cezary Jackiewicz
<[email protected]> wrote:
Add support for TRENDnet TEW-823DRU:
- cpu: QCA9558 @720MHz
- flash: 16MB
- ram: 256MB
- 4+1 RJ45 100/1000Mbps
- wifi: QCA9558 (bgn) and QCA9880-BR4A (ac)
- 1x USB 2.0
Signed-off-by: Cezary Jackiewicz <[email protected]>
Can you confirm the serial port info is correct here?
https://wiki.openwrt.org/toh/trendnet/tew-823dru
Yes, four pin hole on the left.
FWIW, I also found that the u-boot command saveenv overwrites the
first sector containing Linux so don't run that command.
Which indicates the partition layout is wrong:
tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
Without having knowledge about the board, I guess the partition layout
has to be:
spi0.0:256k(u-boot)ro,64k(nvram)...
Side note: I would be really surprised if a TRENDnet devices has a
my-dlink partition. I rather guess the lang and my-dlink partition are
not required for OpenWrt and the flash space can be used for the
firmware partition instead.
Mathias
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
