Hi. Trying Ubiquity power beam M5. According to the instructions on openwrt wiki, I'm using loco m5 firmware. All looks fine, only configuration is lost after every reboot.
Tried: openwrt-15.05.1-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin openwrt-15.05-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin openwrt-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin lede-ar71xx-generic-ubnt-loco-m-xw-squashfs-sysupgrade.bin All with the same result. I remember I had some similar problem in past on a different board, and I believe that there was and issue on definition of nand size. Not really sure. Any ideas? Jiri _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
