My query relates to Type A which is a Lantiq Atheros chipset.
On 29/11/16 17:58, Dave Taht wrote:
since broadcom was sold to another company recently is there any sign
we'll see open drivers for the BCM4360 ?
On Tue, Nov 29, 2016 at 5:11 AM, Mauro M. <[email protected]> wrote:
Hello,
From the OpenWrt wiki page: https://wiki.openwrt.org/toh/bt/homehub_v5a
I understand that support for BT Home Hub 5 was included in DD trunk.
I pulled the latest trunk source 50013 from git, but the image is not built
under bin/lantiq as expected.
As deducted from the firmware images available on-line
(openwrt-lantiq-xrx200-BTHOMEHUBV5A-install-uImage-initramfs) I am using:
Target System (Lantiq) --->
Subtarget (XRX200) --->
Target Profile (Default Profile) --->
There is nothing else other than Default Profile. I was expecting to find a
specific BTHOMEHUB5 configuration.
I run a grep on the code and I found the following:
./target/linux/lantiq/image/Makefile:Image/BuildKernel/Profile/BTHOMEHUBV5A=$(call
Image/BuildKernel/Template,BTHOMEHUBV5A)
./target/linux/lantiq/image/Makefile:Image/Build/Profile/BTHOMEHUBV5A=$(call
Image/BuildNAND/$(1),$(1),BTHOMEHUBV5A)
./target/linux/lantiq/image/Makefile:define LegacyDevice/BTHOMEHUBV5A
./target/linux/lantiq/image/Makefile:LEGACY_DEVICES += BTHOMEHUBV5A
./target/linux/lantiq/base-files/etc/board.d/01_leds:BTHOMEHUBV5A)
./target/linux/lantiq/base-files/etc/board.d/02_network:BTHOMEHUBV5A)
./target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata:
BTHOMEHUBV5A)
./target/linux/lantiq/dts/BTHOMEHUBV5A.dts: model = "BTHOMEHUBV5A - BT
Home Hub 5A";
However I am not sure how to activate the build.
Please could you help?
Thank you in advance,
Mauro
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
