Hi ath10k community,
Does anyone use ath9k driver + 802.11s (or IBSS/adhoc) on commercial
products?
Our setup is AR9331 + ath9k driver + OpenWRT 15.05 + batman-adv 2016.1
(PKG_RELEASE:=3)
We are very serious about robustness of running batman-adv on AR9331,
because we have 20+ commercial sites running, each site is with about 20
nodes.
- batman-adv + ar9331 work almost (well almost) perfectly.
- Sometimes, one node drops off the mesh, occurrence rate is very low.
- For one time, when Node drops off the mesh, "rmmod ath9k" then
"modprobe ath9k" can get both batman-adv (and ibss/adhoc on top of
ath9k) recover. This seemingly points to that the issue is with ath9k
driver (ibss/adhoc mode).
As this email is mainly addressed to ath10k community (rather than
batman-adv or openwrt), does anyone commercially use 802.11s (or
ibss/adhoc)+ ath9k/ath10k? Does 802.11s (or ibss/adhoc) + ath9k/ath10k
work perfectly?
Thanks.
Xuebing Wang
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
