Hi All, I am facing an error where I can't find my USB or SD card and hence cant upgrade to a new image.
SD Card or USB device plugged in would be usually automounted at /tmp/mounts But after sysupgrading to the latest LEDE image, the Omega2+ router detects the USB device getting plugged in but doesnt display anywhere. Not even in /dev/sdaX location. When I plugin a USB device, I get this message: [ 6382.201671] usb 1-1: new high-speed USB device number 3 using ehci-platform root@Omega-FB25:/# ls /dev/ bus mtd5ro ttyS1 console mtd6 ttyS10 cpu_dma_latency mtd6ro ttyS11 full mtdblock0 ttyS12 hwrng mtdblock1 ttyS13 kmsg mtdblock2 ttyS14 log mtdblock3 ttyS15 memory_bandwidth mtdblock4 ttyS2 mmcblk0 mtdblock5 ttyS3 mmcblk0p1 mtdblock6 ttyS4 mtd0 network_latency ttyS5 mtd0ro network_throughput ttyS6 mtd1 null ttyS7 mtd1ro port ttyS8 mtd2 ppp ttyS9 mtd2ro ptmx urandom mtd3 pts watchdog mtd3ro random watchdog0 mtd4 shm zero mtd4ro tty mtd5 ttyS0 root@Omega-FB25:/# dmesg | grep usb [ 2.584787] usbcore: registered new interface driver usbfs [ 2.590508] usbcore: registered new interface driver hub [ 2.596060] usbcore: registered new device driver usb [ 2.630320] phy phy-10120000.usbphy.0: remote usb device wakeup disabled [ 2.637134] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz [ 3.118388] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6377.744209] usb 1-1: USB disconnect, device number 2 [ 6382.201671] usb 1-1: new high-speed USB device number 3 using ehci-platform root@Omega-FB25:/# df -h Filesystem Size Used Available Use% Mounted on /dev/root 2.5M 2.5M 0 100% /rom tmpfs 61.5M 56.0K 61.5M 0% /tmp /dev/mtdblock6 28.3M 820.0K 27.4M 3% /overlay overlayfs:/overlay 28.3M 820.0K 27.4M 3% / tmpfs 512.0K 0 512.0K 0% /dev root@Omega-FB25:/# cd /tmp/mounts /bin/ash: cd: can't cd to /tmp/mounts Tried with both USB 1 and USB 2.0 devices. So tried to connect to Wifi and download new image. But iwconfig is not working. root@Omega-FB25:/# iwconfig /bin/ash: iwconfig: not found Note: This was working fine earlier and I did multiple image swaps between my personal built ones and official images. I upgraded image from Omega2+ image to LEDE image[1]. Any suggestions on how to overcome this would be helpful. [1] https://downloads.lede-project.org/releases/17.01.1/targets/ramips/mt7688/lede-17.01.1-ramips-mt7688-omega2p-squashfs-sysupgrade.bin Thanks, Arun
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
