you are probably using outdated patch On 20 July 2017 at 21:21, Jenny Cabrera Varona <[email protected]> wrote:
> this is the info on my device right now, after some changes trying to get > works with 2312-2732MHz > > # iw reg get > country 00: DFS-UNSET > (2302 - 2732 @ 40), (N/A, 30), (N/A) > (5735 - 5835 @ 80), (N/A, 30), (N/A) > > Using default US > # dmesg | more > [ 10.700000] ath: EEPROM regdomain: 0x0 > [ 10.700000] ath: EEPROM indicates default country code should be used > [ 10.700000] ath: doing EEPROM country->regdmn map search > [ 10.700000] ath: country maps to regdmn code: 0x3a > [ 10.700000] ath: Country alpha2 being used: US > [ 10.700000] ath: Regpair used: 0x3a > [ 10.710000] ieee80211 phy0: Selected rate control algorithm > 'minstrel_ht' > [ 10.730000] cfg80211: Calling CRDA for country: US > [ 10.740000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40 > [ 10.760000] cfg80211: Regulatory domain changed to country: US > [ 10.760000] cfg80211: DFS Master region: FCC > [ 10.770000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 10.780000] cfg80211: (2302000 KHz - 2732000 KHz @ 40000 KHz), (N/A, > 3000 mBm), (N/A) > [ 10.780000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, > 3000 mBm), (N/A) > > Using country 00: > > [ 1001.980000] cfg80211: Calling CRDA to update world regulatory domain > [ 1002.000000] cfg80211: World regulatory domain updated: > [ 1002.000000] cfg80211: DFS Master region: unset > [ 1002.010000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp), (dfs_cac_time) > [ 1002.020000] cfg80211: (2302000 KHz - 2732000 KHz @ 40000 KHz), (N/A, > 3000 mBm), (N/A) > [ 1002.020000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, > 3000 mBm), (N/A) > > # iw list > Frequencies: > * 2412 MHz [1] (21.0 dBm) > * 2417 MHz [2] (26.0 dBm) > * 2422 MHz [3] (26.0 dBm) > * 2427 MHz [4] (26.0 dBm) > * 2432 MHz [5] (26.0 dBm) > * 2437 MHz [6] (26.0 dBm) > * 2442 MHz [7] (26.0 dBm) > * 2447 MHz [8] (26.0 dBm) > * 2452 MHz [9] (26.0 dBm) > * 2457 MHz [10] (26.0 dBm) > * 2462 MHz [11] (21.0 dBm) > * 2467 MHz [12] (26.0 dBm) > * 2472 MHz [13] (26.0 dBm) > * 2484 MHz [14] (26.0 dBm) > > > Please someone can tell me why i can't see the others Frequencies in list > ??? > remember that i need to use 2312-2732MHz > > Thanks very much > > ----------------------------------------------------------------- > ---- Universidad de Camagüey "Ignacio Agramonte Loynaz", Cuba --- > ----------------------------------------------------------------- > ---- https://intranet.reduc.edu.cu/ ----------------------------- > ---- https://www.reduc.edu.cu/ ---------------------------------- > ----------------------------------------------------------------- > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
