2017-07-21 19:48, Nerijus Baliūnas via Lede-dev rašė:
How do I configure vlan? Here I changed eth0 to eth0.1:config interface 'lan' option type 'bridge' option ifname 'eth0.1' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' option ip6assign '60'
I tried config 'switch' 'eth0' option 'enable' '1' option 'enable_vlan' '1' option 'reset' '1' config 'switch_vlan' option 'vlan' '1' option 'device' 'eth0' option 'ports' '1 2 3 4 5t' config 'switch_vlan' option 'vlan' '2' option 'device' 'eth0' option 'ports' '0 5t' Does not work. Do I need to have swconfig installed in order to get the switch working? Because by default it is not installed. Thanks, Nerijus _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
