Currently when installing the firmware, a bunch of files and directories that the ath10k driver does not look for are created.
The package now installs firmware for both hw 2.1 and 3.0 devices. 2.1 is abandonware but may be useful to keep. 3.0 firmware was tested on a Killer 1535 to be relatively stable with 802.11w disabled. 802.11w causes multiple firmware crashes but that's true of other ath10k firmwares as well. Signed-off-by: Rosen Penev <[email protected]> --- package/firmware/ath10k-firmware/Makefile | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/package/firmware/ath10k-firmware/Makefile b/package/firmware/ath10k-firmware/Makefile index eaee0ebc51..2c024905bb 100644 --- a/package/firmware/ath10k-firmware/Makefile +++ b/package/firmware/ath10k-firmware/Makefile @@ -438,8 +438,22 @@ define Package/ath10k-firmware-qca988x/install endef define Package/ath10k-firmware-qca6174/install - $(INSTALL_DIR) $(1)/lib/firmware/ath10k - $(CP) $(PKG_BUILD_DIR)/QCA6174 $(1)/lib/firmware/ath10k/ + $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw2.1 + $(INSTALL_DATA) \ + $(PKG_BUILD_DIR)/QCA6174/hw2.1/board-2.bin \ + $(1)/lib/firmware/ath10k/QCA6174/hw2.1/ + $(INSTALL_DATA) + $(PKG_BUILD_DIR)/QCA6174/hw2.1/firmware-5.bin_SW_RM.1.1.1-00157-QCARMSWPZ-1 \ + $(1)/lib/firmware/ath10k/QCA6174/hw2.1/firmware-5.bin + $(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA6174/hw3.0 + $(INSTALL_DATA) \ + $(PKG_BUILD_DIR)/QCA6174/hw3.0/board-2.bin \ + $(1)/lib/firmware/ath10k/QCA6174/hw3.0/ + $(INSTALL_DATA) + $(PKG_BUILD_DIR)/QCA6174/hw3.0/4.4.1.c1/firmware-6.bin_RM.4.4.1.c1-00042-QCARMSWP-1 \ + $(1)/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin + $(INSTALL_DATA) + endef define Package/ath10k-firmware-qca99x0/install -- 2.17.0 _______________________________________________ openwrt-devel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/openwrt-devel
