Hello Magnus,
Am 05.06.2018 um 00:09 schrieb Magnus Kroken:
Hi Achim
On 02.06.2018 12:37, Achim Gottinger wrote:
Added kernel version 4.14 to mpc85xx.
Rebased all patches
Added new kernel options with default values.
Caam support is not enabled in the kernel.
Fixed typo in Makefile KERNEL_PATCHVER is now 4.14 instead of 4.4.
Thank you Martin Strobel.
Fixed typo in subject sould be patch 2/3 and not 1/3.
Signed-off-by: Achim Gottinger <[email protected]>
---
Tested-by: Magnus Kroken <[email protected]>
Works well on my WDR4900v1. I don't use the crypto driver, so can't
respond to those changes, but the Wi-Fi radios, ethernet and the basic
hardware works fine.
Most of your patches haven't shown up in Patchwork though [1]. Not
sure if there was an issue with Patchwork when you sent your series,
it could also be caused by your mail client malforming the e-mails.
You may want to resubmit the series to ensure they are kept track of,
with git-send-email if possible.
1:
http://patchwork.ozlabs.org/project/openwrt/list/?series=&submitter=74207&state=*&q=&archive=both&delegate=
Regards
/Magnus
__
Thank you for thes tests and the tips about patchwork. Can be I used the
wron numbering for the series because i did not start with 0/3. But I
plan to modify the patches in an way that the caam modules are build in
for generic/p1020 targets and are disabled only on wdr4900v1 which has
no hardware crypto enabled. This way the additional caam module package
is not required and the change does not interfere with other subtargets.
achim~
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/listinfo/openwrt-devel
