--- Begin Message ---
Refresh patches.
Remove patch that can be reverse applied:
mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch
mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch
Update patch that no longer applied:
ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
Compiled-tested-for: lantiq, ramips
Run-tested-on: lantiq BT hh5a, ramips MIR3g
Signed-off-by: Kevin Darbyshire-Bryant <l...@darbyshire-bryant.me.uk>
---
v2 - actually it turns out 531-ATA-achi... isn't required & causes build
failure - oops! Thanks to Gerard Looije for pointing out the error in
my ways :-)
include/kernel-version.mk | 4 +-
...stmmac-Disable-frame-filtering-completely.patch | 2 +-
....16-netfilter-flow-table-support-for-IPv6.patch | 2 +-
...r-improve-flow-table-Kconfig-dependencies.patch | 2 +-
...lowtable-infrastructure-depends-on-NETFIL.patch | 2 +-
.../650-netfilter-add-xt_OFFLOAD-target.patch | 4 +-
.../902-essedma-alloc-skb-ip-align.patch | 7 +-
.../patches-4.14/997-device_tree_cmdline.patch | 4 +-
...ux-Split-out-register-accessors-for-reuse.patch | 6 +-
.../patches-4.14/0069-arm-boot-add-dts-files.patch | 12 +-
.../0012-clk-dont-disable-unused-clocks.patch | 2 +-
...TA-ahci_mvebu-enable-stop_engine-override.patch | 224 ---------------------
.../531-ATA-ahci_mvebu-pmp-stop-errata-226.patch | 110 ----------
13 files changed, 21 insertions(+), 360 deletions(-)
delete mode 100644
target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch
delete mode 100644
target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch
diff --git a/include/kernel-version.mk b/include/kernel-version.mk
index 825a227915..52a8433ec6 100644
--- a/include/kernel-version.mk
+++ b/include/kernel-version.mk
@@ -5,12 +5,12 @@ LINUX_RELEASE?=1
LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.4 = .121
LINUX_VERSION-4.9 = .109
-LINUX_VERSION-4.14 = .50
+LINUX_VERSION-4.14 = .51
LINUX_KERNEL_HASH-3.18.71 =
5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.4.121 =
44a88268b5088dc326b30c9b9133ac35a9a200b636b7268d08f32abeae6ca729
LINUX_KERNEL_HASH-4.9.109 =
3dcd5654a553432119492b69e649c4ed117781bfd571edcb02346c945be359b0
-LINUX_KERNEL_HASH-4.14.50 =
703a8d013b25dc428d936f72858fa0c702c22cb3114a040fb9bb47562e4ea2ac
+LINUX_KERNEL_HASH-4.14.51 =
dab2402baa2444348f9b3c354e8f65382a466d1766942a57441209f9a2df972b
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst
-,_,$(subst /,_,$(1)))))))
diff --git
a/target/linux/arc770/patches-4.14/700-stmmac-Disable-frame-filtering-completely.patch
b/target/linux/arc770/patches-4.14/700-stmmac-Disable-frame-filtering-completely.patch
index 58094ae96d..e63c2e934b 100644
---
a/target/linux/arc770/patches-4.14/700-stmmac-Disable-frame-filtering-completely.patch
+++
b/target/linux/arc770/patches-4.14/700-stmmac-Disable-frame-filtering-completely.patch
@@ -20,7 +20,7 @@ Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -49,7 +49,7 @@
+@@ -46,7 +46,7 @@
#define STMMAC_GET_ENTRY(x, size) ((x + 1) & (size - 1))
#undef FRAME_FILTER_DEBUG
diff --git
a/target/linux/generic/backport-4.14/324-v4.16-netfilter-flow-table-support-for-IPv6.patch
b/target/linux/generic/backport-4.14/324-v4.16-netfilter-flow-table-support-for-IPv6.patch
index a561f2669d..874195558c 100644
---
a/target/linux/generic/backport-4.14/324-v4.16-netfilter-flow-table-support-for-IPv6.patch
+++
b/target/linux/generic/backport-4.14/324-v4.16-netfilter-flow-table-support-for-IPv6.patch
@@ -45,7 +45,7 @@ Signed-off-by: Pablo Neira Ayuso <pa...@netfilter.org>
{
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
-@@ -71,6 +71,14 @@ config NFT_FIB_IPV6
+@@ -99,6 +99,14 @@ config NFT_FIB_IPV6
endif # NF_TABLES_IPV6
endif # NF_TABLES
diff --git
a/target/linux/generic/backport-4.14/329-v4.16-netfilter-improve-flow-table-Kconfig-dependencies.patch
b/target/linux/generic/backport-4.14/329-v4.16-netfilter-improve-flow-table-Kconfig-dependencies.patch
index c897c36724..7174723fc9 100644
---
a/target/linux/generic/backport-4.14/329-v4.16-netfilter-improve-flow-table-Kconfig-dependencies.patch
+++
b/target/linux/generic/backport-4.14/329-v4.16-netfilter-improve-flow-table-Kconfig-dependencies.patch
@@ -72,7 +72,7 @@ Signed-off-by: Pablo Neira Ayuso <pa...@netfilter.org>
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
-@@ -72,8 +72,9 @@ endif # NF_TABLES_IPV6
+@@ -100,8 +100,9 @@ endif # NF_TABLES_IPV6
endif # NF_TABLES
config NF_FLOW_TABLE_IPV6
diff --git
a/target/linux/generic/backport-4.14/346-v4.16-netfilter-flowtable-infrastructure-depends-on-NETFIL.patch
b/target/linux/generic/backport-4.14/346-v4.16-netfilter-flowtable-infrastructure-depends-on-NETFIL.patch
index 5267fd2f67..162086e340 100644
---
a/target/linux/generic/backport-4.14/346-v4.16-netfilter-flowtable-infrastructure-depends-on-NETFIL.patch
+++
b/target/linux/generic/backport-4.14/346-v4.16-netfilter-flowtable-infrastructure-depends-on-NETFIL.patch
@@ -37,7 +37,7 @@ Signed-off-by: Pablo Neira Ayuso <pa...@netfilter.org>
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
-@@ -73,8 +73,7 @@ endif # NF_TABLES
+@@ -101,8 +101,7 @@ endif # NF_TABLES
config NF_FLOW_TABLE_IPV6
tristate "Netfilter flow table IPv6 module"
diff --git
a/target/linux/generic/hack-4.14/650-netfilter-add-xt_OFFLOAD-target.patch
b/target/linux/generic/hack-4.14/650-netfilter-add-xt_OFFLOAD-target.patch
index 418ea469e6..308fe0974d 100644
--- a/target/linux/generic/hack-4.14/650-netfilter-add-xt_OFFLOAD-target.patch
+++ b/target/linux/generic/hack-4.14/650-netfilter-add-xt_OFFLOAD-target.patch
@@ -28,7 +28,7 @@ Signed-off-by: Felix Fietkau <n...@nbd.name>
depends on !NF_CONNTRACK || NF_CONNTRACK
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
-@@ -69,7 +69,6 @@ config NFT_FIB_IPV6
+@@ -97,7 +97,6 @@ config NFT_FIB_IPV6
multicast or blackhole.
endif # NF_TABLES_IPV6
@@ -36,7 +36,7 @@ Signed-off-by: Felix Fietkau <n...@nbd.name>
config NF_FLOW_TABLE_IPV6
tristate "Netfilter flow table IPv6 module"
-@@ -79,6 +78,8 @@ config NF_FLOW_TABLE_IPV6
+@@ -107,6 +106,8 @@ config NF_FLOW_TABLE_IPV6
To compile it as a module, choose M here.
diff --git
a/target/linux/ipq40xx/patches-4.14/902-essedma-alloc-skb-ip-align.patch
b/target/linux/ipq40xx/patches-4.14/902-essedma-alloc-skb-ip-align.patch
index 82766c1f2c..8c70fceb01 100644
--- a/target/linux/ipq40xx/patches-4.14/902-essedma-alloc-skb-ip-align.patch
+++ b/target/linux/ipq40xx/patches-4.14/902-essedma-alloc-skb-ip-align.patch
@@ -8,11 +8,9 @@ Signed-off-by: Chen Minqiang <ptp...@gmail.com>
drivers/net/ethernet/qualcomm/essedma/edma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/net/ethernet/qualcomm/essedma/edma.c
b/drivers/net/ethernet/qualcomm/essedma/edma.c
-index a3c0d66..29bc9f8 100644
--- a/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
-@@ -193,7 +193,7 @@ static int edma_alloc_rx_buf(struct edma_common_info
+@@ -201,7 +201,7 @@ static int edma_alloc_rx_buf(struct edma
skb = sw_desc->skb;
} else {
/* alloc skb */
@@ -21,6 +19,3 @@ index a3c0d66..29bc9f8 100644
if (!skb) {
/* Better luck next round */
break;
---
-2.17.1
-
diff --git a/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch
b/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch
index 51a35c17d9..8b5e64a2d4 100644
--- a/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch
+++ b/target/linux/ipq40xx/patches-4.14/997-device_tree_cmdline.patch
@@ -1,12 +1,12 @@
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
-@@ -1127,6 +1127,9 @@ int __init early_init_dt_scan_chosen(uns
+@@ -1130,6 +1130,9 @@ int __init early_init_dt_scan_chosen(uns
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
+ p = of_get_flat_dt_prop(node, "bootargs-append", &l);
+ if (p != NULL && l > 0)
+ strlcat(data, p, min_t(int, strlen(data) + (int)l,
COMMAND_LINE_SIZE));
-
+
/*
* CONFIG_CMDLINE is meant to be a default in case nothing else
diff --git
a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
index 0d919ee668..e65ca02980 100644
---
a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
+++
b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
@@ -135,14 +135,14 @@ Signed-off-by: Stephen Boyd <sb...@codeaurora.org>
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
else
-@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk
+@@ -110,14 +129,14 @@ static int clk_mux_determine_rate(struct
}
const struct clk_ops clk_mux_ops = {
- .get_parent = clk_mux_get_parent,
+ .get_parent = _clk_mux_get_parent,
.set_parent = clk_mux_set_parent,
- .determine_rate = __clk_mux_determine_rate,
+ .determine_rate = clk_mux_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_mux_ops);
@@ -152,7 +152,7 @@ Signed-off-by: Stephen Boyd <sb...@codeaurora.org>
};
EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
-@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table
+@@ -125,7 +144,7 @@ struct clk_hw *clk_hw_register_mux_table
const char * const *parent_names, u8 num_parents,
unsigned long flags,
void __iomem *reg, u8 shift, u32 mask,
diff --git
a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
index 59f37a7027..b94e4828c9 100644
--- a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
@@ -11,9 +11,9 @@ Signed-off-by: John Crispin <j...@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -699,6 +699,16 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8084-mtp.dtb \
- qcom-ipq4019-ap.dk01.1-c1.dtb \
- qcom-ipq8064-ap148.dtb \
+ qcom-apq8084-mtp.dtb \
+ qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-c2600.dtb \
+ qcom-ipq8064-d7800.dtb \
+ qcom-ipq8064-db149.dtb \
@@ -24,6 +24,6 @@ Signed-off-by: John Crispin <j...@phrozen.org>
+ qcom-ipq8064-wpq864.dtb \
+ qcom-ipq8065-nbg6817.dtb \
+ qcom-ipq8065-r7800.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git
a/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch
b/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch
index ed4111dce3..33ede7d3a6 100644
---
a/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch
+++
b/target/linux/mediatek/patches-4.14/0012-clk-dont-disable-unused-clocks.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blo...@openwrt.org>
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
-@@ -796,7 +796,7 @@ unlock_out:
+@@ -797,7 +797,7 @@ unlock_out:
clk_core_disable_unprepare(core->parent);
}
diff --git
a/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch
b/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch
deleted file mode 100644
index 2d56749607..0000000000
---
a/target/linux/mvebu/patches-4.14/530-ATA-ahci_mvebu-enable-stop_engine-override.patch
+++ /dev/null
@@ -1,224 +0,0 @@
-From fa89f53bd7288d6aa7a982841119e7123faf5a53 Mon Sep 17 00:00:00 2001
-From: Evan Wang <xsw...@marvell.com>
-Date: Fri, 13 Apr 2018 12:32:30 +0800
-Subject: [PATCH] libahci: Allow drivers to override stop_engine
-
-Marvell armada37xx, armada7k and armada8k share the same
-AHCI sata controller IP, and currently there is an issue
-(Errata Ref#226)that the SATA can not be detected via SATA
-Port-MultiPlayer(PMP). After debugging, the reason is
-found that the value of Port-x FIS-based Switching Control
-(PxFBS@0x40) became wrong.
-According to design, the bits[11:8, 0] of register PxFBS
-are cleared when Port Command and Status (0x18) bit[0]
-changes its value from 1 to 0, i.e. falling edge of Port
-Command and Status bit[0] sends PULSE that resets PxFBS
-bits[11:8; 0].
-So it needs save the port PxFBS register before PxCMD
-ST write and restore the port PxFBS register afterwards
-in ahci_stop_engine().
-
-This commit allows drivers to override ahci_stop_engine
-behavior for use by the Marvell AHCI driver(and potentially
-other drivers in the future).
-
-Signed-off-by: Evan Wang <xsw...@marvell.com>
-Cc: Ofer Heifetz <of...@marvell.com>
-Cc: Tejun Heo <t...@kernel.org>
-Cc: Thomas Petazzoni <thomas.petazz...@bootlin.com>
-Signed-off-by: Tejun Heo <t...@kernel.org>
----
- drivers/ata/ahci.c | 6 +++---
- drivers/ata/ahci.h | 7 +++++++
- drivers/ata/ahci_qoriq.c | 2 +-
- drivers/ata/ahci_xgene.c | 4 ++--
- drivers/ata/libahci.c | 20 ++++++++++++--------
- drivers/ata/sata_highbank.c | 2 +-
- 6 files changed, 26 insertions(+), 15 deletions(-)
-
-diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
-index 1ff17799769d0..6389c88b3500a 100644
---- a/drivers/ata/ahci.c
-+++ b/drivers/ata/ahci.c
-@@ -698,7 +698,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link,
unsigned int *class,
-
- DPRINTK("ENTER\n");
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-@@ -724,7 +724,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link,
unsigned int *class,
- bool online;
- int rc;
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
-@@ -788,7 +788,7 @@ static int ahci_avn_hardreset(struct ata_link *link,
unsigned int *class,
-
- DPRINTK("ENTER\n");
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- for (i = 0; i < 2; i++) {
- u16 val;
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index a9d996e17d75e..824bd399f02ea 100644
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -365,6 +365,13 @@ struct ahci_host_priv {
- * be overridden anytime before the host is activated.
- */
- void (*start_engine)(struct ata_port *ap);
-+ /*
-+ * Optional ahci_stop_engine override, if not set this gets set to the
-+ * default ahci_stop_engine during ahci_save_initial_config, this can
-+ * be overridden anytime before the host is activated.
-+ */
-+ int (*stop_engine)(struct ata_port *ap);
-+
- irqreturn_t (*irq_handler)(int irq, void *dev_instance);
-
- /* only required for per-port MSI(-X) support */
-diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
-index 2685f28160f70..cfdef4d44ae92 100644
---- a/drivers/ata/ahci_qoriq.c
-+++ b/drivers/ata/ahci_qoriq.c
-@@ -96,7 +96,7 @@ static int ahci_qoriq_hardreset(struct ata_link *link,
unsigned int *class,
-
- DPRINTK("ENTER\n");
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- /*
- * There is a errata on ls1021a Rev1.0 and Rev2.0 which is:
-diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
-index c2b5941d9184d..ad58da7c9affd 100644
---- a/drivers/ata/ahci_xgene.c
-+++ b/drivers/ata/ahci_xgene.c
-@@ -165,7 +165,7 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
- PORT_CMD_ISSUE, 0x0, 1, 100))
- return -EBUSY;
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
- ahci_start_fis_rx(ap);
-
- /*
-@@ -421,7 +421,7 @@ static int xgene_ahci_hardreset(struct ata_link *link,
unsigned int *class,
- portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR);
- portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI);
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- rc = xgene_ahci_do_hardreset(link, deadline, &online);
-
-diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
-index 7adcf3caabd00..e5d90977caec2 100644
---- a/drivers/ata/libahci.c
-+++ b/drivers/ata/libahci.c
-@@ -560,6 +560,9 @@ void ahci_save_initial_config(struct device *dev, struct
ahci_host_priv *hpriv)
- if (!hpriv->start_engine)
- hpriv->start_engine = ahci_start_engine;
-
-+ if (!hpriv->stop_engine)
-+ hpriv->stop_engine = ahci_stop_engine;
-+
- if (!hpriv->irq_handler)
- hpriv->irq_handler = ahci_single_level_irq_intr;
- }
-@@ -897,9 +900,10 @@ static void ahci_start_port(struct ata_port *ap)
- static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
- {
- int rc;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-
- /* disable DMA */
-- rc = ahci_stop_engine(ap);
-+ rc = hpriv->stop_engine(ap);
- if (rc) {
- *emsg = "failed to stop engine";
- return rc;
-@@ -1310,7 +1314,7 @@ int ahci_kick_engine(struct ata_port *ap)
- int busy, rc;
-
- /* stop engine */
-- rc = ahci_stop_engine(ap);
-+ rc = hpriv->stop_engine(ap);
- if (rc)
- goto out_restart;
-
-@@ -1549,7 +1553,7 @@ int ahci_do_hardreset(struct ata_link *link, unsigned
int *class,
-
- DPRINTK("ENTER\n");
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
-@@ -2075,14 +2079,14 @@ void ahci_error_handler(struct ata_port *ap)
-
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- /* restart engine */
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
- hpriv->start_engine(ap);
- }
-
- sata_pmp_error_handler(ap);
-
- if (!ata_dev_enabled(ap->link.device))
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
- }
- EXPORT_SYMBOL_GPL(ahci_error_handler);
-
-@@ -2129,7 +2133,7 @@ static void ahci_set_aggressive_devslp(struct ata_port
*ap, bool sleep)
- return;
-
- /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */
-- rc = ahci_stop_engine(ap);
-+ rc = hpriv->stop_engine(ap);
- if (rc)
- return;
-
-@@ -2189,7 +2193,7 @@ static void ahci_enable_fbs(struct ata_port *ap)
- return;
- }
-
-- rc = ahci_stop_engine(ap);
-+ rc = hpriv->stop_engine(ap);
- if (rc)
- return;
-
-@@ -2222,7 +2226,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
- return;
- }
-
-- rc = ahci_stop_engine(ap);
-+ rc = hpriv->stop_engine(ap);
- if (rc)
- return;
-
-diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
-index aafb8cc035232..e67815b896fcc 100644
---- a/drivers/ata/sata_highbank.c
-+++ b/drivers/ata/sata_highbank.c
-@@ -410,7 +410,7 @@ static int ahci_highbank_hardreset(struct ata_link *link,
unsigned int *class,
- int rc;
- int retry = 100;
-
-- ahci_stop_engine(ap);
-+ hpriv->stop_engine(ap);
-
- /* clear D2H reception area to properly wait for D2H FIS */
- ata_tf_init(link->device, &tf);
-
diff --git
a/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch
b/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch
deleted file mode 100644
index e71cc0c49f..0000000000
---
a/target/linux/mvebu/patches-4.14/531-ATA-ahci_mvebu-pmp-stop-errata-226.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From daa2e3bdbb0b3e691cf20a042350817310cb8cb5 Mon Sep 17 00:00:00 2001
-From: Evan Wang <xsw...@marvell.com>
-Date: Fri, 13 Apr 2018 12:32:31 +0800
-Subject: [PATCH] ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI
-
-There is an issue(Errata Ref#226) that the SATA can not be
-detected via SATA Port-MultiPlayer(PMP) with following
-error log:
- ata1.15: PMP product ID mismatch
- ata1.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- ata1.15: Port Multiplier vendor mismatch '0x1b4b'!='0x0'
- ata1.15: PMP revalidation failed (errno=-19)
-
-After debugging, the reason is found that the value Port-x
-FIS-based Switching Control(PxFBS@0x40) become wrong.
-According to design, the bits[11:8, 0] of register PxFBS
-are cleared when Port Command and Status (0x18) bit[0]
-changes its value from 1 to 0, i.e. falling edge of Port
-Command and Status bit[0] sends PULSE that resets PxFBS
-bits[11:8; 0].
-So it needs a mvebu SATA WA to save the port PxFBS register
-before PxCMD ST write and restore it afterwards.
-
-This patch implements the WA in a separate function of
-ahci_mvebu_stop_engine to override ahci_stop_gngine.
-
-Signed-off-by: Evan Wang <xsw...@marvell.com>
-Cc: Ofer Heifetz <of...@marvell.com>
-Cc: Tejun Heo <t...@kernel.org>
-Cc: Thomas Petazzoni <thomas.petazz...@bootlin.com>
-Signed-off-by: Tejun Heo <t...@kernel.org>
----
- drivers/ata/ahci_mvebu.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
-diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
-index de7128d81e9cc..0045dacd814b4 100644
---- a/drivers/ata/ahci_mvebu.c
-+++ b/drivers/ata/ahci_mvebu.c
-@@ -62,6 +62,60 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv
*hpriv)
- writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
- }
-
-+/**
-+ * ahci_mvebu_stop_engine
-+ *
-+ * @ap: Target ata port
-+ *
-+ * Errata Ref#226 - SATA Disk HOT swap issue when connected through
-+ * Port Multiplier in FIS-based Switching mode.
-+ *
-+ * To avoid the issue, according to design, the bits[11:8, 0] of
-+ * register PxFBS are cleared when Port Command and Status (0x18) bit[0]
-+ * changes its value from 1 to 0, i.e. falling edge of Port
-+ * Command and Status bit[0] sends PULSE that resets PxFBS
-+ * bits[11:8; 0].
-+ *
-+ * This function is used to override function of "ahci_stop_engine"
-+ * from libahci.c by adding the mvebu work around(WA) to save PxFBS
-+ * value before the PxCMD ST write of 0, then restore PxFBS value.
-+ *
-+ * Return: 0 on success; Error code otherwise.
-+ */
-+int ahci_mvebu_stop_engine(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ u32 tmp, port_fbs;
-+
-+ tmp = readl(port_mmio + PORT_CMD);
-+
-+ /* check if the HBA is idle */
-+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
-+ return 0;
-+
-+ /* save the port PxFBS register for later restore */
-+ port_fbs = readl(port_mmio + PORT_FBS);
-+
-+ /* setting HBA to idle */
-+ tmp &= ~PORT_CMD_START;
-+ writel(tmp, port_mmio + PORT_CMD);
-+
-+ /*
-+ * bit #15 PxCMD signal doesn't clear PxFBS,
-+ * restore the PxFBS register right after clearing the PxCMD ST,
-+ * no need to wait for the PxCMD bit #15.
-+ */
-+ writel(port_fbs, port_mmio + PORT_FBS);
-+
-+ /* wait for engine to stop. This could be as long as 500 msec */
-+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
-+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
-+ if (tmp & PORT_CMD_LIST_ON)
-+ return -EIO;
-+
-+ return 0;
-+}
-+
- #ifdef CONFIG_PM_SLEEP
- static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t
state)
- {
-@@ -112,6 +166,8 @@ static int ahci_mvebu_probe(struct platform_device *pdev)
- if (rc)
- return rc;
-
-+ hpriv->stop_engine = ahci_mvebu_stop_engine;
-+
- if (of_device_is_compatible(pdev->dev.of_node,
- "marvell,armada-380-ahci")) {
- dram = mv_mbus_dram_info();
-
--
2.15.2 (Apple Git-101.1)
--- End Message ---
