This patch adds the pinmux support to the ar9330 used to disable the
JTAG or to enable switch LEDs
Signed-off-by: Rocco Folino <ro...@folino.io>
---
target/linux/ath79/dts/ar9330.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/target/linux/ath79/dts/ar9330.dtsi
b/target/linux/ath79/dts/ar9330.dtsi
index 3d3dd87f9b2f..65445de1f161 100644
--- a/target/linux/ath79/dts/ar9330.dtsi
+++ b/target/linux/ath79/dts/ar9330.dtsi
@@ -61,6 +61,24 @@
status = "disabled";
};
+ pinmux: pinmux@18040028 {
+ compatible = "pinctrl-single";
+ reg = <0x18040028 0x8>;
+
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ #pinctrl-cells = <2>;
+
+ jtag_disable_pins: pinmux_jtag_disable_pins {
+ pinctrl-single,bits = <0x0 0x1 0x1>;
+ };
+
+ switch_led_pins: pinmux_switch_led_pins {
+ pinctrl-single,bits = <0x0 0x1f 0xf8>;
+ };
+ };
+
pll: pll-controller@18050000 {
compatible = "qca,ar9330-pll";
reg = <0x18050000 0x100>;
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
