The WDR4900v1 uses the P1040 SoC, so the device tree pulls in the definition for the related P1010 SoC. However, the P1040 lacks the CAAM/SEC4 hardware crypto accelerator which the P1010 device tree defines. If left defined, this causes the CAAM drivers (if present) to attempt to use the non-existent device, making various crypto-related operations (e.g. macsec and ipsec) fail.
This commit overrides the incorrect dt node definition in the included file. See also: - https://bugs.openwrt.org/index.php?do=details&task_id=1262 - https://community.nxp.com/thread/338432#comment-474107 Signed-off-by: Tim Small <t...@seoss.co.uk> --- .../files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts index c2444936b7..bde5eb9575 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts @@ -236,3 +236,27 @@ }; /include/ "fsl/p1010si-post.dtsi" + +/* + * The TL-WDR4900 v1 uses the NXP (Freescale) P1014 SoC which is closely + * related to the P1010. + * + * NXP QP1010FS.pdf "QorIQ P1010 and P1014 Communications Processors" + * datasheet states that the P1014 does not include the accelerated crypto + * module (CAAM/SEC4) which is present in the P1010. + * + * NXP Appliation Note AN4938 Rev. 2 implies that some P1014 may contain the + * SEC4 module, but states that SoCs with System Version Register values + * 0x80F10110 or 0x80F10120 do not have the security feature. + * + * All v1.3 TL-WDR4900 tested have SVR == 0x80F10110 which AN4938 describes + * as: core rev 1.0, "P1014 (without security)". + * + * The SVR value is reported by uboot on the serial console. + */ + +/ { + soc: soc@ffe00000 { + /delete-node/ crypto@30000; /* Pulled in by p1010si-post */ + }; +}; -- 2.11.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
