The OCEDO Raccoon only has one ethernet port, but currently uci sections
for WAN and LAN are created.
Additionally, newer versions of the devices U-Boot (units with SteelWRT)
set the kernel-cmdline and therefore overwrite the partition-layout.
We fix this by overwriting the cmdline supplied by the bootloader.
Signed-off-by: David Bauer <m...@david-bauer.net>
---
target/linux/ath79/base-files/etc/board.d/02_network | 1 +
target/linux/ath79/dts/ar9344_ocedo_raccoon.dts | 4 ++++
2 files changed, 5 insertions(+)
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network
b/target/linux/ath79/base-files/etc/board.d/02_network
index dd75a55b73..c5e23e4e50 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -13,6 +13,7 @@ ath79_setup_interfaces()
ucidef_set_interface_lan "eth0" "dhcp"
;;
"avm,fritz300e"|\
+ "ocedo,raccoon"|\
"tplink,re450-v2"|\
"tplink,tl-mr10u"|\
"tplink,tl-wr703n"|\
diff --git a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
index a98f251e34..01d5dae307 100644
--- a/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
+++ b/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
@@ -10,6 +10,10 @@
model = "OCEDO Raccoon";
compatible = "ocedo,raccoon", "qca,ar9344";
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
aliases {
led-status = &system;
};
--
2.18.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
