On 6 August 2018 at 19:46, Kristian Evensen <[email protected]> wrote: > While finalizing support for the U7623 with 512MB RAM, I made an embarrassing > error and configured 1GB RAM for the board. I also forgot to move memory > from the dtsi and to the dts. This commit takes care of my errors. > > While I am confessing my mistakes, I also note that I made a mistake in > the commit message of the initial U7623 commit. It is the .bin-file, and > not the .gz file that shall be sent to the device via tftp. > > Signed-off-by: Kristian Evensen <[email protected]> > --- > .../0227-arm-dts-Add-Unielec-U7623-DTS.patch | 37 > +++++++++++++--------- > 1 file changed, 22 insertions(+), 15 deletions(-) > > diff --git > a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch > b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch > index eb864e4657..8c0b7611b6 100644 > --- > a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch > +++ > b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch > @@ -1,16 +1,18 @@ > -From 13872b8abfadfe70598c065c19d1db759477c4e6 Mon Sep 17 00:00:00 2001 > +From 1ebcba67d45f1365bcb1b5eb8b0cd8c847610ef2 Mon Sep 17 00:00:00 2001 > From: Kristian Evensen <[email protected]> > Date: Sun, 17 Jun 2018 14:41:47 +0200 > Subject: [PATCH] arm: dts: Add Unielec U7623 DTS > > --- > arch/arm/boot/dts/Makefile | 1 + > - .../dts/mt7623a-unielec-u7623-02-emmc-512M.dts | 17 + > - .../boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi | 375 > +++++++++++++++++++++ > - 3 files changed, 393 insertions(+) > + .../dts/mt7623a-unielec-u7623-02-emmc-512M.dts | 22 ++ > + .../boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi | 366 > +++++++++++++++++++++ > + 3 files changed, 389 insertions(+) > create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts > create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi > > +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > +index 3fec84fa0..e685ce9a4 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ > @@ -21,9 +23,12 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS > mt7623n-rfb-nand.dtb \ > mt7623n-bananapi-bpi-r2.dtb \ > mt8127-moose.dtb \ > +diff --git a/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts > b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts > +new file mode 100644 > +index 000000000..6efa6e159 > --- /dev/null > +++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512M.dts > -@@ -0,0 +1,17 @@ > +@@ -0,0 +1,22 @@ > +/* > + * Copyright 2018 Kristian Evensen <[email protected]> > + * > @@ -40,10 +45,18 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS > + memory { > + reg = <0 0x80000000 0 0x20000000>; > + }; > ++ > ++ memory@80000000 { > ++ device_type = "memory"; > ++ reg = <0 0x80000000 0 0x20000000>; > ++ };
You are adding a second memory node with the same register range as the one directly above here, that looks wrong. Regards Jonas _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
