On Monday, October 22, 2018 11:04:14 PM CEST Robert Marko wrote: > On Mon, 22 Oct 2018 at 23:03, Christian Lamparter <[email protected]> wrote: > > > > The NBG6617's boardfile was merged and this device can > > now switch to the upstream ath10k board-2.bin. > > This is only applicable if ath10k-firmware is selected as by default > ath10k-firmware-ct is used and that one uses the old board files from > May in Kalles ath10k-firmware repository.
Ah, that's what "[OpenWrt-Devel,2/4] ath10k-firmware: update board-2.bin for community firmwares" should be doing, as it updates it to 2018-10-18, right? (But I just noticed that the PKG_MIRROR_HASH wasn't updated in 2/4... Ooops I'll send a v2) > > > > Signed-off-by: Christian Lamparter <[email protected]> > > --- > > .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git > > a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts > > > > b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts > > index 4d366142a1..c74fce55fa 100644 > > --- > > a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts > > +++ > > b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts > > @@ -301,10 +301,12 @@ > > > > &wifi0 { > > status = "okay"; > > + qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; > > }; > > > > &wifi1 { > > status = "okay"; > > + qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; > > }; > > > > &usb3_ss_phy { > > -- > > 2.19.1 > > > > > > _______________________________________________ > > openwrt-devel mailing list > > [email protected] > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
