Russell Senior <[email protected]> writes:
> Works for me, on current HEAD*, with ar71xx (netgear wndr3800). Can
> you include your /etc/config/network and any other relevant
> configuration details?
>
> * $ git describe
> reboot-8373-gbc3d47cd12
Good to hear.
Is yours configured as a bridge anywhere? My apu2 (x86) is not.
I can reconfigure a wndr3800 "out of the box" with both head and
stable and try that in a night or two on the network where the
arm is working. (production network can't fiddle)
As per the bug report, I see no responses to my ip6 queries.
Had 24 days of uptime...
apu2:
root@office:~# ifstatus wan6
{
"up": false,
"pending": true,
"available": true,
"autostart": true,
"dynamic": false,
"proto": "dhcpv6",
"device": "eth0",
"data": {
}
}
I should see at least *some* ipv6 traffic here?
root@office:~# tcpdump -i eth0 ip6
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
19:41:55.339916 IP6 fe80::20d:b9ff:fe43:a06c.546 > ff02::1:2.547: dhcp6
solicit
every x seconds...
... that's it.
ip6tables -F as well as -P whatever ACCEPT
Tried both reqprefix 56 and 60.
config interface 'wan6'
option ifname 'eth0'
option proto 'dhcpv6'
option reqprefix '56'
option dns '2001:558:feed::1 2001:558:feed::2'
...
while I'm here, have you had any success in getting a relay to work?
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
