From: Martin Weinelt <h...@darmstadt.ccc.de>
The WAN LED now shows the link state. It's color is green,
not blue.
Use the physical radio for the WiFi-LED to be resilient
against changing interface names
Signed-off-by: Martin Weinelt <h...@darmstadt.ccc.de>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 ++-
target/linux/ramips/dts/GL-MT300N-V2.dts | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5f5e5630fd..6a1729f34d 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -149,7 +149,8 @@ gl-mt750)
set_wifi_led "$boardname:wlan"
;;
gl-mt300n-v2)
- set_wifi_led "$boardname:red:wlan"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
+ ucidef_set_led_switch "wlan2g" "wlan2g" "$boardname:red:wlan" "phy0tpt"
;;
hc5661|\
hc5661a)
diff --git a/target/linux/ramips/dts/GL-MT300N-V2.dts
b/target/linux/ramips/dts/GL-MT300N-V2.dts
index 48c43baeff..ba5a595b10 100644
--- a/target/linux/ramips/dts/GL-MT300N-V2.dts
+++ b/target/linux/ramips/dts/GL-MT300N-V2.dts
@@ -35,7 +35,7 @@
};
wan {
- label = "gl-mt300n-v2:blue:wan";
+ label = "gl-mt300n-v2:green:wan";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
--
2.19.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
