On Sun, 25 Nov 2018 at 16:43, Karl-Felix Glatzer <[email protected]> wrote: > On 2018-11-24 10:30:59, Rafał Miłecki wrote: > > On Fri, 23 Nov 2018 at 22:03, Karl-Felix Glatzer <[email protected]> > > wrote: > > > This patch adds support for TP-Link Archer A7 > > > > > > Specification: > > > - SOC: QCA9563 > > > - Flash: 16 MiB (SPI) > > > - RAM: 128 MiB (DDR2) > > > - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN > > > - Wireless: > > > - 2.4GHz (bgn) SoC internal > > > - 5GHz (ac) QCA988x > > > - USB: 1x USB 2.0 port > > > - Button: 1x power, 1x reset, 1x wps > > > - LED: 10x LEDs > > > - UART: holes in PCB > > > - Vcc, GND, RX, TX from ethernet port side > > > - 115200n8 > > > > > > Flash instructions: > > > > > > Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin > > > via the Webinterface. > > > > > > Flash instruction using tftp recovery: > > > > > > 1. Connect the computer to one of the LAN ports of the Archer A7 > > > 2. Set the computer IP to 192.168.0.66 > > > 3. Start a tftp server with the OpenWrt factory image in the tftp > > > root directory renamed to ArcherC7v5_tp_recovery.bin > > > 2. Connect power cable to Archer A7, press and hold the reset button > > > and turn the router on > > > 3. Keep the reset button pressed for ~5 seconds > > > 4. Wait ~150 seconds to complete flashing > > > > > > Changes since first revision: > > > > > > - Flash instructions using stock image webinterface > > > - Changed "Version 5" in model string to "v5" > > > - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi > > > and qca9563_tplink_archer-a7-v5.dts > > > - Firmware image is now build with dynamic partitioning > > > - Default to ath10k-ct > > > > Looks pretty nice. > > > > Could you provide me a boot log with mtd partitioning messages? I'd > > like to see how mtd creates partitions on this device. > > > > Sure. I've attached the output of dmesg as dmesg.log. > > These seem to be all the messages related to the spi flash and mtd > partitioning: > > [ 0.391041] m25p80 spi0.0: w25q128 (16384 Kbytes) > [ 0.395992] 7 fixed-partitions partitions found on MTD device spi0.0 > [ 0.402546] Creating 7 MTD partitions on "spi0.0": > [ 0.407521] 0x000000000000-0x000000020000 : "factory-uboot" > [ 0.414019] 0x000000020000-0x000000040000 : "u-boot" > [ 0.419760] 0x000000040000-0x000000f00000 : "firmware" > [ 0.451110] 2 uimage-fw partitions found on MTD device firmware > [ 0.457262] 0x000000040000-0x0000001c6955 : "kernel" > [ 0.462973] 0x0000001c6955-0x000000f00000 : "rootfs" > [ 0.468741] mtd: device 4 (rootfs) set to be root filesystem > [ 0.474676] 1 squashfs-split partitions found on MTD device rootfs > [ 0.481063] 0x0000004c0000-0x000000f00000 : "rootfs_data" > [ 0.487266] 0x000000f40000-0x000000f60000 : "info" > [ 0.492805] 0x000000f60000-0x000000fb0000 : "config" > [ 0.498596] 0x000000fc0000-0x000000fd0000 : "partition-table" > [ 0.505209] 0x000000ff0000-0x000001000000 : "art"
Thanks! Please kindly add compatible = "denx,uimage"; to the "firmware" partition node, for details you can see: [OpenWrt-Devel] Specifying "firmware" partition format on all DTS targets http://lists.infradead.org/pipermail/openwrt-devel/2018-November/014706.html -- Rafał _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
