Looks like C60 v2 needs the MAC address to be calculated
manually, while the C60 v1 gets it correctly without manual
interference.
Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de>
---
.../ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 53f5377..d21d413 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -168,13 +168,18 @@ case "$FIRMWARE" in
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
- archer-c60-v2|\
cf-e355ac-v2|\
cf-e375ac)
ath10kcal_extract "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
+ archer-c60-v2)
+ ath10kcal_extract "art" 20480 12064
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ath10kcal_patch_mac $(macaddr_add $(cat
/sys/class/net/eth0/address) -1)
+ ;;
cf-e385ac)
ath10kcal_extract "art" 20480 12064
;;
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
