On Friday, 6 April 2018 17:17:55 CET Kalle Valo wrote: > From: Sebastian Gottschall <[email protected]> > > Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based > chipsets with on chipset connected led's using WMI Firmware API. The LED > device will get available named as "ath10k-phyX" at sysfs and can be > controlled > with various triggers. adds also debugfs interface for gpio control. > > Signed-off-by: Sebastian Gottschall <[email protected]> > Reviewed-by: Steve deRosier <[email protected]> > [kvalo: major reorg and cleanup] > Signed-off-by: Kalle Valo <[email protected]>
This patch was imported to OpenWrt in commit 61d57a2f88b9 ("mac80211: ath10k
add leds support") and broke the 11s support for IPQ4019 and QCA4019 (5GHz)
firmware versions 10.4-3.5.3-00053, 10.4-3.5.3-00057, 10.4-3.6-00140:
[ 221.620803] ath10k_pci 0000:01:00.0: wmi command 36967 timeout,
restarting hardware
[ 221.744056] ieee80211 phy0: Hardware restart was requested
[ 225.130829] ath10k_pci 0000:01:00.0: failed to receive control response
completion, polling..
[ 226.170824] ath10k_pci 0000:01:00.0: Service connect timeout
[ 226.170871] ath10k_pci 0000:01:00.0: failed to connect htt (-110)
[ 226.252248] ath10k_pci 0000:01:00.0: Could not init core: -110
This was tested on an A62 with following wireless config:
config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'soc/40000000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'VHT80'
option disabled '0'
option country US
config wifi-device 'radio1'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'platform/soc/a000000.wifi'
option htmode 'HT20'
option disabled '0'
option country US
config wifi-device 'radio2'
option type 'mac80211'
option channel '149'
option hwmode '11a'
option path 'platform/soc/a800000.wifi'
option htmode 'VHT80'
option disabled '0'
option country US
config wifi-iface 'mesh0'
option device 'radio0'
option ifname 'mesh0'
option network 'nwi_mesh0'
option mode 'mesh'
option mesh_id 'TestMesh'
option mesh_fwding '1'
option encryption 'none'
config wifi-iface 'mesh1'
option device 'radio1'
option ifname 'mesh1'
option network 'nwi_mesh1'
option mode 'mesh'
option mesh_id 'TestMesh'
option encryption 'none'
config wifi-iface 'mesh2'
option device 'radio2'
option ifname 'mesh2'
option network 'nwi_mesh2'
option mode 'mesh'
option mesh_id 'TestMesh'
option mesh_fwding '1'
option encryption 'none
Kind regards,
Sven
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
