On 29.03.19 13:55, Hauke Mehrtens wrote:
On 3/29/19 1:43 PM, Ben Greear wrote:
On 03/29/2019 02:58 AM, Koen Vandeputte wrote:
On 26.03.19 19:39, Ben Greear wrote:
On 3/26/19 6:59 AM, Koen Vandeputte wrote:
On 26.03.19 14:50, Ben Greear wrote:
On 03/26/2019 03:09 AM, Koen Vandeputte wrote:
Hi Ben,
Following our conversation from yesterday, here is a summary of
all issues seen so far:
Test setup:
- Board: Mikrotik RB922
- Hardware used: on-board QCA9882 (QCA988x), Wave1 2x2 .ac
- firmware's tested: both non-HTT and HTT flavours for qca988x
Synopsis:
- Setting the interface in IBSS mode results in following errors
and spamming
- Speed is very low (100 kbit/s) upon linking 2 devices in HT20,
long GI
Hello,
Do you see those SWBA overrun messages on both systems, or just one
of them?
I'll work on fixing the out-of-my-tree compile for 4.20 today, as
well as do
a quick test on 4.19 to see if I see that error below.
Thanks,
Ben
Hi Ben,
A huge amount of then continuously:
I updated ath10k-ct (commit-id:
be5c21a82b15d28991500a28f7b2b6840356281f)
I fixed part of the issue with 4.20 not compiling in openwrt, but the
other part appears to be
a backports issue, and I did not attempt to get that working.
Hi Ben,
This is still remaining using 4.20:
make[4]: Entering directory
'/mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/linux-4.14.109'
CC [M]
/mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.o
/mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.c:
In function 'ath10k_mac_register':
/mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.c:9772:11:
error: 'NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT' undeclared (first use
in this function); did you mean
'NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT'?
NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT
/mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.c:9772:11:
note: each undeclared identifier is reported only once for each
function it appears in
I think you will need to go back to 4.19 based driver, or add a hack to
#ifdef that code out while compiling
in openwrt.
I did a brief test with the 4.19 ct driver and it seems to work OK in my
test setup. Since it appears openwrt
will be stuck on 4.19 for a while, I'll put some more effort into
keeping my 4.19 tree up to date.
Also, I found a nasty bug with mgt frames in htt-mgt mode yesterday, and
uploaded new beta firmware to my
web page...will post csums and such to this list later today.
Thanks,
Ben
Hi,
I have a more recent mac80211 framework from kernel 5.1-rc2 in my
feature branch:
https://git.openwrt.org/?p=openwrt/staging/hauke.git;a=shortlog;h=refs/heads/mac80211-5.0
I plan to merge this after the next release is branched off.
You could try that with ath10k-ct from kernel 4.20.
Hauke
Hi All,
I tested Hauke's idea but it didn't work:
Latest mac80211 5.1-rc2 + ath10k-ct (4.19) --> Still the same errors as
described initially (tried both CT firmware flavours - see bootlog below
for details)
Latest mac80211 5.1-rc2 + ath10k-ct (4.20) --> Compile error regarding
blockack ..
So basically .. IBSS functionality died along the way.
I recall I tested it roughly 1.5 years ago and it worked beautifully then.
Full bootlog: https://pastebin.com/RBSa1Zxf
Regards,
Koen
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
