On 5/9/19 7:28 PM, Tomasz Maciej Nowak wrote:
Hi Jeff,
W dniu 09.05.2019 o 18:25, Jeff Kletsky pisze:
On 5/9/19 12:04 PM, Petr Štetiar wrote:
Jeff Kletsky <[email protected]> [2019-05-09 11:23:18]:
I reconfirmed that
openwrt/target/linux/ath79$ cp generic/config-default nand/config-default
openwrt$ cat /dev/null > .config
openwrt$ make menuconfig
has the same behavior -- the nand target does not set PCI_SUPPORT
it works here(tm):
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_nand=y
CONFIG_TARGET_ath79_nand_DEVICE_glinet_gl-ar300m-nand=y
CONFIG_ATH10K-CT_LEDS=y
CONFIG_DRIVER_11AC_SUPPORT=y
CONFIG_PACKAGE_kmod-ath10k-ct=y
CONFIG_PACKAGE_kmod-hwmon-core=y
-- ynezz
What I'm seeing is that ath10k gets stripped out for nand,
but not for nor. I ran "virgin" tests with the scripts below,
with the same config-default in both generic/ and nand/.
I did run Your script for nand and this is the output (removed feeds to
speed-up):
[tomek@vaio-vpcz1 openwrt]$ ./test.sh
Cloning into 'openwrt-nand-test'...
[...]
# CONFIG_PACKAGE_ath10k-firmware-qca99x0-ct is not set
# CONFIG_PACKAGE_ath10k-firmware-qca99x0-ct-htt is not set
# CONFIG_PACKAGE_kmod-ath10k is not set
CONFIG_PACKAGE_kmod-ath10k-ct=y
So it appears to work.
[...]
When adding changes to target/subtarget config sometimes It's necessary to
remove
$(TOPDIR)/tmp to see changes, maybe that's the issue You were hitting?
Regards
--
TMN
Removing $(TOPDIR)/tmp did resolve the issue, thanks!
Still somewhat puzzling, but enough to let me proceed here
and come back to see if I can improve the dependencies another day.
The time of all involved is greatly appreciated.
Jeff
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
